With the onset of the Autodesk Manufacturing Academy (AMA), things have gotten exciting, so I have to confess that the blog has suffered a bit. So much to do, so much to do! Getting ready with Sheet Metal, Interoperability, among so many other things. It's fun, but it's a challenge too.
But even though I'm trying to get some of the metal ducks in a row (which, to carry on with animal analogies, has been more like herding mental cats), I thought about some of the ribbon customizations that can be accomplished in Inventor.
One of the things that I've wanted to adjust is the 'View Face' (formerly known as 'Look At') tool. Even with my Space Pilot Pro, I still use it from time to time. But in R2010, it's a little inconveniently placed, at least in my opinion.
By default, it's on the View tab, with the other viewing tools, which I don't use quite as often, or access by other means.
(Click to Enlarge)
Not hard to get to, but not easy either
I'd like to move it somewhere it will always be within easy reach. Fortunately there is a location where you can do just that, called the Quick Access Toolbar.
(Click to Enlarge)
One of the nicer properties of the Quick Access Toolbar is that it's always visible, no matter what ribbon your currently using. Add to that, you can place your own icons on it, like…. View Face for example.
How do I do that? It's actually pretty straight forward. If you right click on the icon you want to move (View Face), you can choose 'Add to Quick Access Toolbar', and you're off! That's it.
(Click to Enlarge)
Now the Quick Access Toolbar will have a 'View Face' icon available.
(Click to Enlarge)
What's the benefit of this? No matter what ribbon you're using, you'll always have the 'View Face' icon available.
(Click to Enlarge)
One final note, I'm sometimes asked how I feel about customization. I tend to keep my customizations to a minimum. As a matter of fact, this is the only customization I've made to my Inventor interface, and even then, I was slow in making it.
Why? There're two simple reasons for me.
The simple reason, I have to train Inventor, and I can't really have my interface customized to the moon. So I keep it pretty vanilla.
The more 'practical' reasons. If I have a more vanilla setup, I can walk up to the majority of Inventor stations, fire them up, and start modeling, I don't have to mess around with importing, or recreating the customizations.
That's it, no great secret. This one, I'll probably keep. This may be my sole customization for a long time. But with so many things, this is up to the individual.
This is one for the ages. Like that relative that nobody talks about, but appears for Christmas in years with the number '6' at the end, I've only seen this one come up three times in my entire career. Two I directly saw, the last I ran across on a discussion group.
When you start a program in Windows, all of a sudden your screen resolution drops to 'ugly'. I'm showing this one in Inventor, but it's not limited to Inventor, or even Autodesk at all. You can change the same options on programs like the 3Dconnexion Driver, and some of the Adobe products as well.
(Click to Enlarge)
If you shut off your program, it magically goes away. It's quite infuriating (like when that same relative empties your refrigerator). So what would cause it?
If you right click on the short cut that starts the Windows Program (Inventor in this example).
(Click to Enlarge)
Choose properties, click the 'Compatibility' tab, and you'll see the following screen.
(Click to Enlarge)
You'll usually find that one of the check boxes on this screen are checked, causing the program to drop the resolution when you start it.
Unchecking the box (256 colors) in this example, has fixed the issue every time I've encountered it.
Why does it happen? I haven't a clue. I've only seen the aftermath. It's not even a setting that a user could easily find and check by mistake.
It's kinda like coming home and finding that your relative has crashed your car into the swimming pool, but somehow all the fences around the pool are still intact.
So that fixes what might be one of the strangest 'errors' I've encountered. It seems to me more prone to happening on an XP box (I couldn't force my Vista 64bit box to create the error), but who knows. It's pretty strange.
After a brief hiatus, I'm back in the saddle with iLogic again. It's now starting to make sense
First of all, what is iLogic. I'm definitely guilty of sometimes jumping into the nuts and bolts of what I'm doing, without telling everyone what I'm doing.
iLogic is a utility that allows you to create rules via a simplified code. It's based on VB.Net, but doesn't require you to be some sort of code guru to make it work.
The good news. iLogic is a free add-on for subscription members from the Autodesk Subscription website here. You'll need to login. If you're not on subscription. Well, I'm afraid that you'll be on the outside looking in.
I've been looking for something meaningful to me to start creating rules for, and something began to make sense to me.
Since I love simplicity (I think that a simple solution can be a marvelous solution), I started with the 235-U Destaco toggle clamp I downloaded from the Autodesk Content Warehouse.
(Click to Enlarge)
After a little conversion, I figured out that the clamping force is 750 lbs, and the clamp height is 1.69in. I can remember, this, but I decided to use iLogic to create rule that's going to remind me what they are automatically.
First, I get my part downloaded from the site, and opened up in Inventor.
(Click to Enlarge)
First, a disclaimer. I did change the colors of the components (initially they did come in all gray).
But aside from that, it's stock. So now to get the code started.
Step 1: Click on the Manage tab, and choose the 'Add Rule' button to start the iLogic wizard.
(Click to Enlarge)
Step 2: iLogic will ask you to name the rule.
(Click to Enlarge)
Step 3: After the rule is named, the rule wizard will open. You can start typing your code now, but if you don't know code, click on the 'Rule Syntax' tab. It'll have sample lines of code that will help guide you. (See step 3)
(Click to Enlarge)
Step 3: Here I've used the Rules Syntax Wizard to put in text that is essentially my 'template' for my code.
(Click to Enlarge)
Step 4: Now for 'Message', I substitute the following
"Clamping Force = 750 lbs" & Chr(13) & "Height Under Bar = 1.69 in"
The data in the quotes is the text I want to show in my dialog box. The text '& Chr(13) &' is the code for carriage return. This will force the text to appear on two separate lines.
For 'Title' I substitute 'Clamp Stats'. This is just the title of the dialog box.
So my overall line of code looks like this:
MessageBox.Show("Clamping Force = 750 lbs"&Chr(13) &"Height Under Bar = 1.69 in", "Clamp Stats")
Inside the wizard, the code will look like this:
(Click to Enlarge)
I can now close this window, and the rule is created. If you haven't made any mistakes, it'll display right away.
(Click to Enlarge)
So far, this is pretty cool. But I have one more thing I want to do. I want to set this so that every time this file opens, the dialog pops up and advises me of the clamp load. This way, I can quickly see if this clamp meets my desired requirements.
To do this, I click on iLogic utilities, on the Manage tab. '
(Click to Enlarge)
When I do this, I get the list pictured below. Notice I've circled 'Rules Triggered by Events'
(Click to Enlarge)
When I click this button, I get a new dialog screen.
(Click to Enlarge)
You'll notice that there's one for 'After Open Document'. By right clicking on that, I get 'Edit List of Rules'. Choose 'Edit List of Rule'.
Yet another dialog box shows up, and you can check the box have the Clamp Load Rule trigger every time you open this document.
Now your ready. Hit 'OK' to close the dialogs and save the document. Everytime you open this file, the rule will fire, and you'll see the load for this rule.
That's it for iLogic!
As for me and my adventures? I was down at the Planes of Fame Museum again this weekend (I'm volunteering to be a guide, so I'm still in the training process). But I swung by and saw some of the guys working on the N9MB Flying Wing.
She suffered an engine fire in 2006 on takeoff, and thankfully made a safe landing, but she's been grounded since then while undergoing repairs. The engines have been reverse engineered (since they're no more spares), so it's been a time consuming process.
But, the parts are starting to arrive now, so hopefully within a year, she'll be up in the air again.
Unfortunatley, I didn't have my camera, and it didn't occur to me to use my cell phone camera, but here's a picture I took at the last airshow in May. In the second shot you can see where the engines are removed.
Let's hope we see her taking off again like she is below! This picture courtesy of the Goleta Air & Space Museum's website
“A good plan today is better than a perfect plan tomorrow”
Proverb
Surprise! My upgrade didn't go according to plan. So, what went wrong?
The image that I'd created a while back..... No good. I installed it, and all appropriate progress bars and blinky lights seemed to be in order.
But when I go to start my new Vista 64 bit install? BLUE SCREEN OF DEATH.
Now our first thought might be to blame Vista, because that's the most obvious target. It's not fair though. I've never used this imaging software before (Ping), so it's possible that the imaging software caused the issue, or it could even be good old fashioned user error.
Besides, once the blame is assigned, I still had to contend with a laptop that was 'bricked'.
When used in reference to electronics, "brick" describes a device that cannot function in any capacity (such as a device with damaged firmware). This usage derives from the fact that some electronic devices (and their detachable power supplies) are vaguely brick-shaped, and so those which do not function are as useful only as actual bricks. The term can also be used as a verb. For example, "I bricked my MP3 player when I tried to modify its firmware."
But as one of my friends in I.T. taught me: Have a backup plan.
What's that plan?
So I install from scratch, and as of now, my OS is up and running. It takes a couple of hours to install the security updates (tedious, but necessary). Now I'm getting my remaining software slowly installed again.
So as of right now, no screen captures, because Snagit and Camtasia aren't back on yet.
But we're on our way. Software is starting to get back installed, and my performance is noticeably better. Whatever was plaguing my system seems to be cured now.
There's still more to be done, but I'm definitely off and running.
The moral of my little adventure? When you're doing anything major like this, have a fallback plan in case the first doesn't work. I'd be in for a pretty long night tonight if I hadn't had the disks as a backup.
And while things aren't ideal, I'll be at 100% by tomorrow.
Sometimes it's not about whether or not things go according to plan. It's how well you recover when the plan goes wrong.
“Technically, Windows is an "operating system," which means that it supplies your computer with the basic commands that it needs to suddenly, with no warning whatsoever, stop operating.”
Dave Barry
This weekend, I'm in the process of performing some serious maintenance on my laptop.
I'm razing the OS to the ground, and reinstalling all over again. Scorched Earth, so to speak.
As with most Windows Operating Systems that see heavy use, this installation of Windows XP is looking pretty ragged.
For those of us who live on the ragged edge, you've seen it. Usually your system starts getting slow, and defragging and temp space clearing only does so much good.
For those foolish or daring enough (I'm not sure which I am yet), this is the time for a total rebuild of your system. Rebuild it from the ground up.
Lucky for me, I've got some of my building blocks in place. So before we start, here's what we have.
1) An image created for Vista 64 bit on this machine. (I created it a ways back, just in case).
2) Installation disks for Vista 64bit. Just in case the image turns out to be bad. (This is my first use of it, so I'm makings sure to have a backup plan).
3) Installation disks for all my software that will eventually live on the system.
So all that is in play. Now we start the long 'progress bar rodeo' of backing up all my data. (There's no way I'm attempting this without a backup!).
As I write this, my system is backing up to my portable hard drive. That's going to take into the evening.
Tonight, I expect to get the image installed. Forunately, tomorrow is a day off for me (mental health vacation day), so I can finish out tomorrow if needed.
Yeah, I know what you're thinking. "What kind of freak are you? It's your vacation day and you're installing software?!?"
It's the best day to do it, and besides, most of what I'll be doing is letting progress bars do their thing.
In any case, wish me luck. Hopefully tonight is met with much rejoicing, instead me cursing the error of my ways.
“A wise man makes his own decisions, an ignorant man follows public opinion” Chinese Proverb
So, on a note a little separate from my typical CAD Geek stuff, I've decided to post my thoughts on my SpacePilot Pro that I've been using for about two months or so now.
My SpacePilot Pro on my desk. Yes, my desk is a typical 'designer's desk'. A mess! (click to enlarge)
I preface this with a disclaimer. These are my thoughts with my 'user' shirt on, feel free to take them and use them to formulate your own opinion.
I've also been using 3D Connexion devices for about five years now (I started with the now discontinued Space Traveler), so I'm familiar with them. It's just the SpacePilot Pro I've been getting used to.
With that being said. What is a SpacePilot Pro?
For those of us who may not have heard of them before, they're a little hard to describe. You'll hear them called '3D orbiters' (which is what I call them), or '3D mice'.
In short, they take over the Zoom, Orbit, and Pan functions inside inside of Inventor (and other CAD products they support). 3D Connexion has a nice web video HERE.
The fancier versions (like the Pro) also have buttons that can be programmed to duplicate other Inventor functions, such as starting a new sketch, or activating assembly constraints (among a myriad of other functions).
They start out with the SpaceNavigator (the least expensive and most portable), and progress through the Space Explorer, Space Pilot, and Space Pilot Pro, each adding more functionality (and of course cost).
Now with the descriptions over, lets talk about my experience with the SpacePilot Pro.
The first thing I noticed, and liked, was the shape of it. It's very comfortable. My hand rests easily on its curved shape, and the buttons are easy to get to. The puck has feels smooth and very responsive. They've definitely been improving the sensors since my trusty old Traveler.
Another prominent feature is the LCD screen. It has applets installed that will tell you what function the programmable keys are set to do, it can preview Outlook, view RSS feeds, or even be a picture viewer. A driver update also lets it show you the properties from your Inventor files.
While it may seem a little 'gimmicky', I found that the LCD did help with some of the little things, like seeing if that e-mail that came in while I was away was from my boss, or a newsletter from a vendor that could wait until later.
The LCD Screen, and some of the buttons (click to enlarge)
The unit also feels very solid. It's got some nice heft to it, which for the most part, I like. It doesn't slide around on my desk, and lets me feel like any input I'm going to give goes straight to my model.
Last, but certainly not least, how does it affect workflow? While using Inventor, I've found that it's reduced the amount of times my left hand moves across the keyboard, especially for the orbit hot key.
The programmable buttons also unload my right hand from right clicking, or reaching for hot keys on the right hand side of the key board.
Is the change enormous? No, it's not. A model that would take me three hours to build isn't done in thirty minutes. But I do find the process of building my Inventor models to be smoother, easier, and more efficient.
Take my SpacePilot away from me, and you'll find me pawing at the left hand side of my laptop like a Golden Retriever chasing bunnies in his sleep.
As you can see, I'm a big fan of my SpacePilot Pro. If I have a bias (which I'm sure I do), you could certainly accuse me of being a big advocate.
However, as much as I like it, I can see a few drawbacks for it.
The buttons can take some practice to get used to. While this doesn't bother a geek like myself, the casual user may not get the 'seat time' to get accustomed to them. If you don't have the time or inclination for a the learning curve, it may not be for you. If you still like the functionality of having the orbiting controls, the SpaceNavigator may be a great solution though.
The price is pretty steep. With an MSRP of $499 USD, the sticker shock is pretty high. This may also cause the part time users to shy away. I think the hardcore users (like myself) will find the price more of an investment.
It's pretty hefty. While the weight makes it feel solid, it's not exactly the most portable device around, so if you highly mobile, you may not want to carry it from place to place. (I bought a ditty bag at the local camping store, and improvised a carrier from that, and the original vacuum formed packaging). A SpaceNavigator is probably the best solution for someone who is highly mobile, but doesn't want to carry the extra weight.
So in summary:
The positive:
It's comfortable to use
The buttons provide useful functionality, and are easy to reach
It has a solid, high-quality feel to it.
The LCD screen adds some subtle, but useful, functionality.
It improves the 'experience' of building models in Inventor
The negative:
They're pretty pricey
There's a learning curve to get used to all those buttons. It may not be for the casual CAD users (like a manager who reviews models periodically)
It's heavy. If you're a mobile user, it can be a lot to lug around
Ultimately, I wouldn't be without my SpacePilot Pro. I'm happy I got it, and would replace it in a heartbeat if something were to happen to it (although you have no idea how careful I am with it). I deal with the fact that it's a noticeable addition to my 'kit' when i move from place to place.
For those who want more information, you can always contact me at KETIV.
If you live in Southern California, we also have a demo station where you can try out the SpacePilot Pro for a few minutes.
Feel free to swing by if you ever want to try one out (although please let us know your coming. The unit is also used in our training labs, so we'd want to make sure it's available!).
That's it for my first product review. I hope you found it helpful.
"Great things are done by a series of small things brought together." -- Vincent Van Gogh
This is one of those 'little things', but if experience has taught me anything, the little things matter. That holds true for things like Inventor as well.
While working in one of our training labs over at KETIV. A student pointed out that when they were sketching, the coincident constraints were showing up as yellow dots at the corner of the geometry.
(click to enlarge)
The dots representing the constraints are benign. They only server to tell you that the constraint is there. But, they do add clutter to your screen, and if you subscribe to my theory, I've got enough clutter in my life, at the very least I can get the clutter off my computer screen!
So how do I get rid of the dots?
Go to Tools>Application options, and choose the 'Sketch' Tab. On that tab, you'll find the option to uncheck the display of the those dots.
(click to enlarge)
Unchecking that option will remove the dots, making for that cleaner, uncluttered look preferred by many.
Note: You may have to right click and 'hide all constraints' to clean the point off the current geometry, but once this option is deselected, you won't have to worry about it appearing on new geometry.
(click to enlarge)
Happy Inventing, everyone! Don't forget the little things!
Home computers are being called upon to perform many new functions, including the consumption of homework formerly eaten by the dog.Doug Larson
Something I guess you might consider from the "Public Service Announcement' desk.
The other day at KETIV, I was asked about an issue where pdfs printed from DWF files in Autodesk Design Review were taking a much longer to print out than in previous versions.
A quick check of the Autodesk website showed that there's a hotfix for this,so it should be an easy fix.
So if you're seeing this issue out of Design Review 2010, just grab the hotfix HERE, and you should be on your way with faster PDF creation!
Have a great weekend everyone! I'm off to my volunteer gig at the Planes of Fame again, so that alone is going to make it a great weekend!
Everything has beauty, but not everyone sees it. ~Confucius
I've blogged on bump mapping in Autodesk Showcase before, but with so many things in Showcase, it seems like it's as much art as science.
Of course you can add materials in Showcase, and in previous blogs (click here) I talked about how you can use bump maps to add 'character' to a material.
But at times, when trying to use bump maps, you end up with a ray traced image that seems to be grainy. Look at the clamp below. Everything seems fine, but the clamp definitely has that 'grainy' appearance.
(click to Enlarge)
You're first instinct might be to crank up the resolution, but it doesn't seem to help. Trust me on this: I've tried it. It eats up processor time, and doesn't improve the quality of the image. It also tends degrade the temperament of the operator.
But there is hope for both the image quality, and operator mood!
As with many things with Showcase, this is somewhat subjective, but one things that operator instinct seems to be to make a bump map far deeper than it needs to be.
Even looking at the bump map that I've used (unaltered from the Showcase material library) has a bump depth of 1.0, which is pretty high. You might think it's the highest possible setting, but I've found that typing in a higher number will let you go higher than 1.0.
(click to enlarge)
The solution that I've found? I drop the depth of the bump map down. And when I say down, I start cranking it WAY down. I usually cut it in half, then half again, and repeat that process until I get to the result I like. So if I start a 1.0, I go down to 0.5, then 0.25, etc.
You should be able to find a value that works. In this case, I found that I got to a value of .125before I was happy with the result.
So you can see how just changing that bump map can change the look of the file. Other settings you can user are the angle of a bump map, as well as the scale. (For example, I also changed the angle and scale of the wood grain to make it more appealing).
(click to enlarge)
While subtle, each of these settings play their part in helping create a rendering that is really eye catching.
As another example, here's a box with only the bump depth changed. In the first image, the bump depth is at 1.0. I refer to this as 'having a brushed finish applied with a chainsaw). Feel free to use that, but I want the credit! :-)
(click to enlarge)
Now, setting it to .032 (with a few iterations in between), we get to something that's a little bit more subtle, and far more compelling, I think.
(click to enlarge)
Have fun trying different settings, and try something a little bit 'crazy'. You may find that it makes the rendering really 'pop'. In which case, you get to make the transition from 'crazy' to 'visionary'.
As for the jig? Here's teh full image, I cleaned up a few things, and gave it a tilt. Here it is in all it's ray traced glory.
(click to enlarge)
Enjoy, and have a little fun trying different variations of these settings. I find it's when I'm having fun, I do my best work in Showcase.
Not until we are lost do we begin to understand ourselves. Henry David Thoreau
Last night, myself, as an Inventor User, found myself in what can definitely be considered foreign territory.
I found myself in an Autodesk Revit users group.
No, I didn't get lost on the way home.
I was looking into the new AEC Exchange functionality in Inventor R2010, and how it talks to Revit.
But I'm a manufacturing guy. I change my own oil, think unburned fuel may as well be perfume, and believe that the sound of a P-51 Mustang running at full power is the the sound of angels singing.
Those who've heard, know. (click to enlarge)
Architecture? Well, that's not my gig, let the pros take care of that, right?
But there's an undeniable fact that users of Inventor have to create files for buildings (after all, that air conditioning system is being manufactured somewhere, isn't it?)
I'm fortunate that Jay Zallan, Autodesk Revit User Extraordinaire and BIM Scholar invited me to the South Coast Revit User Group (SCRUG) to visit.
I was really impressed by the energy of the meeting, everybody was energetic, passionate, and constructive about how to best use Revit.
Door Families. The topic of the night. (click to enlarge)
They were also very welcoming to a somewhat curious and puzzled Inventor user who had passed through the looking glass into an architectural world.
Moreover, they were more than willing to offer their help and guidance as I learned more about the things that are vital to the project they're work with on a daily basis.
Look! I library of doors! Library... We do speak the same language! (click to enlarge)
I have to say that I left their group more excited about the possibilities than I had when I was when I arrived.
I'm really looking forward to having a chance to work with them in the future!
Look to upcoming blogs on our progress on AEC Exchange!
Happy Weekend everyone! It's about that time here in California!
For more information on AEC Exchange, here's the Autodesk video that discusses it. Note the epic 'Announcer Man' voice. :-)
One of the Internet's strengths is its ability to help consumers find the right needle in a digital haystack of data. ~Jared Sandberg
Not that long ago, I was talking with a friend at PARTsolutions about finding content on the internet. While much can be done with various search engines, he reminded me that sometimes more quaint forms of communication, such as putting your Blue Tooth headset in your ear and making a cell phone call in the car on the drive home, are still valuable ways of communication.
It was during this conversation that he reminded me that Autodesk has its Manufacturing Supplier Content website available.
Granted, I had heard this before, but somewhere it had fallen behind the file cabinet of my mind and gotten lost.
I did have to create a login, but I went ahead and created one, and took a look.
Enter the beam of light and the choir voices singing...
The image shown in the screen capture greeted my eyes.
(click to enlarge)
So much content.... It was just so.... pretty... and contenty....
Once I shook off the initial shock. I decided to check out some content. After one aborted attempt, I double checked some settings. This will setup the default format to download.
(click to enlarge)
With those preferences saved, I went out and chose a component to download. I noticed DeStaco clamps was one of my choices, and I used a grip of DeStaco clamps when I was in industry. So that's who I went with.
(click to enlarge)
I clicked through a couple of sections, and got to the good ol' toggle clamps that were an ever present part of some of the fixtures I built. I even found a part number that I recall using, complete with preview.
(click to enlarge)
Once I found the part, I clicked on the Part Download button (which looks like a little Socket Head Cap Screw) and the site built the parts for me to download. The down loadable content will appear in the lower right hand side of the screen, and you can click on the 'disk' icon to download it.
(click to enlarge)
Once you click on the download icon, you'll be asked to save a zip file to your drive. Extracting the zip and opening the file in Inventor, here's my result.
In a few moments, I have the clamp as an assembly that I can use in a design. It's accurate, and up to date, straight from the source.
(click to enlarge)
Granted, all the parts are grounded, but I can add the constraints pretty quickly. I even changed the colors of the parts to look a little more realistic.
(click to enlarge)
If you really want to go wild, you can even add positional representations and create the open and close positions for the clamp.
(click to enlarge)
The key, I think, is the fact that the geometry (which is the heavy lifting) is already there.
However far you decide to take this. You can (and probably ought to) save it in some sort of library, be it a location on the server, or checking it into Autodesk Vault.
Now your off and running on other components of your design! I know I'll be checking back on this site quite often now! Happy Wednesday!
“Invention, strictly speaking, is little more than a new combination of those images which have been previously gathered and deposited in the memory; nothing can come of nothing”
Joshua Reynolds (British Painter, 1723-1792)
Sometimes, inspiration really does hit you out of the blue.
A little while ago, I was working with the new multi-body functionality inside of Inventor (see blog post HERE).
Then the inspiration hit me. I can use solids as a skeleton in Frame Generator, what happens if I us the split tool to split the skeleton?
No way to find out but to try it, right?
So I built a frame using Frame Generator, with a solid for a skeleton. The frame members that I've placed run the entire length of the skeleton.
(click to enlarge)
I want to break them up into two sections (let's say that it's for ease of manufacture). How can I do that?
This is where that split tool can come in handy. Used the split tool to split the body into two.
I go ahead and edit the skeleton (in this case, the blue box). I'm using a workplane in this case, although I could use an extruded surface as well.
(click to enlarge)
With a workplane placed on the skelton, I can go to my Split tool, and split the solid that represents my skeleton into two pieces.
(click to enlarge)
Once I hit 'OK', and the body is split into two separate bodies.
(click to enlarge)
With the bodies split, I finish editing this part and return to the assembly level. The members will adjust to follow one of the bodies. (Note, that you may need to remove existing end treatments before they do this).
(click to enlarge)
Now you can add new members, using two lengths to fill this section. You can also add any welds or gussets you may need. Here I've added the red and green members (among others), as well as the black gusset).
(click to enlarge)
The time to alter the design was pretty small (around 15 minutes). If I zoom in closely, you can even see where I added welds to the frame using the welding environment.
(click to enlarge)
That's it! I hope this helps!
Also, for more information on Frame Generator, particularly customizing Frame Generator, check out Rob Cohee's video HERE! And check out some of his other videos too. They're entertaining and informative!
Also, check out the Tips and Tricks section on the KETIV website HERE. We at KETIV a pretty excited about it!
