Copy Design in Autodesk Vault - Where I used it.

My hobby of not attending meetings about recycling saves more energy than your hobby of recycling.
John McCarthy

Over the course of the last few weeks of my copious spare time, I've been building up a chest of drawers in Autodesk Inventor.

As far as I've gotten so far.  The drawers are in blue.

In other words, a few minutes here, a few minutes there... 

Since I don't have a ton of time to devote to it, I have to make the best use of the time I have. 

So I use Autodesk Vault to manage the files that comprise this little side job.

It's almost like I'm working on a real project instead of just playing around with the tools! 

And, let me tell you, having those files in Vault came in handy!

The chest of drawers has three drawers that are are all very similar (the fourth opens as a desk, so it's quite different).  Only the height of the three drawers changes.  But they all have the same five basic components. 

1. A front
2. A back
3. A left side
4. A right side
5. A bottom

Each of these five components has its own piece drawing, plus an assembled view, and an exploded view.

Alright, I know some of you might be saying, "Do you really need all that."

My answer?  "No, I don't.  But this is one of those cases where I just can' resist the urge to overdo it a little!"

Okay, maybe I'm overdoing it more than a little.

But now I have these parts, assemblies, explosions, and drawings for every drawer..... So do I really want to recreate each one of those two more times?

An example of some of the documentation

The answer to that rhetorical question is, of course, a resounding NO!

So what did I do?  I created the bottom drawer, in all it's glorious detail.  The components, the assemblies, the explosions the drawings.

Then, with all that checked into Vault, I fired up my copy design, and copied the components I needed, as well as the assemblies, explosions and drawings.  I even was able to make sure that I reused the drawer bottom for the other drawers.  Since it was the same component throughout.

Choosing the drawer parts to copy

So what's the big deal?  By using copy design, everything involved in creating the drawing was already done.

Sure, I had to resize parts, adjust some dovetails, and make sure my drawings still looked clean.  But I didn't have to recreate any assemblies, explosions, drawings, then dimension and annotate that drawing all over again.

So when all was said and done, the second and third drawer were finished in a fraction of the time it took me to create the first.

It ended up being a nice little time saver!  :-D

So if you need to duplicate similar components quickly, Copy Design might just be the right tool for the job!

So here's a video for Copy Design from back in the archives !  (Click here for the full post)

Tolar Manufacturing - Autodesk Inventor of the Month for January 2012

“Neither team has anything but pride to play for at this point, but our guys have got a lot of heart and they've shown me that all year.”
Jamie Keefe

Sometimes when you return from vacation, you find that something unpleasant has "hit the oscillating cooling device", and the day you took off is now getting made up in the overtime you're working to fix whatever has broken loose.

This time, when I returned from my snowboarding trip, I was greeted by something far more pleasant.

Tolar Manufacturing was announced as the Autodesk Inventor of the Month!

Tolar Manufacturing makes bus shelters for cities all over.  They're designed in Autodesk Inventor, and their presentations are shown in Autodesk Showcase.  They're storing all that CAD goodness inside of Autodesk Vault.

Example of a Tolar Bus Shelter rendered in Autodesk Showcase

Between using Inventor, Showcase, and Vault.  Tolar is able to design, present, store, and reuse all their data.  Inventor makes the data more robust, Vault allows the file to be tracked, located, and reused, and Showcase allows them to present the design intent to the cities that will be using their products.

It's a nice little engineering circle of life.

So why am I beaming with pride?  I helped set up their Vault, install their Inventor, and train them on Showcase.  It's really exciting for me to see where they've gone. 

Does that mean I was an indispensable part of the team?  That they "could have done it without me?" 

No, I just played my small part.  They took the tools, and ran with them.  The credit is truly all theirs.

I'm just happy that I got to play that little part!

So here's a video!  Not mine though.  This one is all about Tolar, and what they've been able to accomplish! 

Maybe it'll inspire all of us to look again and our tools, and make sure we're using them to their full potential!

On Vacation Today!

Hey, everyone!

I'm pushing this weeks blog post back a few days. 

I'm on one of my winter holidays up to Mammoth Mountain, Ca. 

I hope everyone has a good Monday!  I know I will!

This was my weekend! How was yours?

Creating Custom Content for Autodesk Inventor Content Center - Part 4 (Hint: Editing Family Tables)

“I won't deny there's some big changes coming down the road.”
Rick Higgins

In my last blog post on Content Center, I wrote about adding components to Content Center.  But just because the component is added, doesn't mean it's ready yet.

An image of the wood screw I placed into Content Center in my last blog

There may be fields to be added, removed, or changed.  You might want to add components to your tables, making more variations of your part available.

So this is a blog on how you can start making changes to your tables, expanding them and making them work for you .

In this video, I take the wood screw that I added to my Content Center in my last blog, and add some stainless steel variations, remove an unneeded column.

I'll also make one of the columns a "Key" column that will allow me to choose a Stainless Steel or Carbon Steel wood screw.

Placing the screw.  Nominal size, Total Length, & Material are my key columns.

I wish I could cover all the possible changes that could be made, but there's just too many to cover.  But the video should help get you started!

KETIV's 2011 Autodesk Manufacturing Academy Recordings are Out!

“Nothing has really happened until it has been recorded”
Virginia Woolf

At long last!  After much hard work, the bow tie on the 2011 edition of KETIV's Autodesk Manufacturing Academy!

The videos!  They're all up and ready for download!

So if you've attended the classes presented by the the KETIV technical team, or even if you didn't attend, and want the benefits of the course materials.  Take a swing by the session archive and download all the materials!

Click HERE for the link to download the materials!  

Fire away and start eating up some bandwith!  ;-)  You can even download the 2010 and 2009 materials too!

I hope those who attended took some useful things away!  Go

I hope to see you all, (and a few more) at the next 2012 KETIV AMA!


And as a trailer for the movie, here's a sample of the classes on Autodesk Showcase, so you can get an idea of what's available!

Special thanks to Tolar Manufacturing for providing us with some great real world samples to use in the session!

Autodesk Showcase Part 1 - Importing Models




Autodesk Showcase Part 2 - Changing Environments



Autodesk Showcase Part 3 - Assigning Materials




Autodesk Showcase Part 4 - Changing Materials




Autodesk Showcase Part 5 - Adding Lights

Creating Custom Content for Autodesk Inventor Content Center - Part 3

 “Then memorize it, practice it, personalize it and then you can easily customize it for success, ... The Boy Scouts have it right: Be prepared - always.”
Steve Walsh  

In my blog last week, I described how to setup Autodesk Inventor's Content Center Libraries so they could components could be written to it.

Now with the custom component created, I'll take the next step and show how you can publish an iPart to the read/write library that was created earlier.

An example of a part that's been published to Content Center

When published to Content Center, a custom component places into Inventor just like a component that shipped "in the box" with the product.

Placing a custom part into an Autodesk Inventor Assembly

This can help centralize components, keeping things manageable from one place instead of several.

Special thanks to Charlie Bliss's website.  Where I got the iPart I used for this example.

When creating these components, I would recommend one thing.  Make sure that you test the library out a couple of times before you "release it into the wild".  I've found that I'm never 100% happy with my first result, and make a couple of changes before I'm ready to let it go.

So double check, it's a lot easier to fix it before you let other designers get their grubby little hands on it!

And to get all the details, here's a video for you to check out the steps!

And don't forget to click here for the final part of this series, Part 4!

Creating Custom Content for Autodesk Inventor Content Center - Part 2

“I have always imagined that Paradise will be a kind of library.”
Jorge Luis Borges

In my last post, I talked about Content Center.  Mostly what Content Center is, particularly with respect to Desktop Content Center versus Content Center running through the Autodesk Data Management Server Console.

But the long term goal of this series of blog post is to publish content to a custom library of our own creation.

So for our next step, I'm going to create a short blog post on creating those custom libraries.

The libraries that come with Autodesk Inventor are Read Only.  So you can only use them, you can't modify them, or add to them. 

In order to be able to make additions and modifications, you need to create a Read/Write Library.

The first thing to know, is if you're using Desktop Content, or Vault Content.  The libraries are created in different places for each.

I'm using Desktop Content Center

With Desktop Content, go to the "Get Started" and choose "Projects".

Choose "Configure Content Center Libraries.  A new screen will appear that will allow you to configure the libraries for your project.

Now you're ready to create a Read/Write library

Select "Create Library", and a new Read/Write Library will be added with the name you enter

Creating the Read/Write Library

Important!  Make sure the new library is checked!  If it's not, the library won't be available to the project!  This, needless to say, makes the whole point of creating it moot.  

Custom Library Created.  Note that it's checked! This makes it available for the project to use!

I'm using the Autodesk Data Management Console (Server)

We'll need to access the server, and have administrative rights to the Autodesk Data Management Server, so be ready to bribe the I.T. staff or Cad Manager if necessary.

Once you've gained access to your server, right click on the Libraries folder and choose "Create Library".

Creating the Library Folder

A new Read/Write Library will be added with the name you enter.

New library selected!

Note that just like above (with Desktop Content), you'll need to make sure the library is checked in the project!  If not, it won't be available!

Make sure you make the libraries available! 

So that's getting the stage set to create the read/write library for your Content Center.  Now we're ready to start adding data to the Content Center!

That will be the next post here!  Creating Custom Content for Autodesk Inventor Content Center - Part 3

Creating Custom Content for Autodesk Inventor Content Center - Part 1

“Our doubts are traitors and make us lose the good we oft might win, by fearing to attempt”

I haven't spent a lot of time with Content Center in Autodesk Inventor.  It's just one of those things I always told myself I'd get into, but like so many projects and intentions, it was set aside for more pressing matters.

But during the holiday break, I found the need to dive into Content Center, and start peeling back it's layers and start creating some custom content.

One of the things I found, was once I got into it, was it's not as intimidating as it might look at first glance.  Once I dug into it, I found that, dare I say, it began to make sense.

So I decided to start sharing what I've learned (and I'm still learning).  I hope you find it helpful.  These are just my thoughts on what I've seen so far.

Since there are so many facets to working  with Content Center, I found the prospect of doing it in one big blog post pretty daunting.  So I decided to break it up into smaller bits that might be easier to digest, and yes, it's going to be a lot easier for me to write! 

So for starters.  Let's talk about this Content Center thing.

To get started, what exactly is Content Center?  

Content Center is a series of libraries that generate standard components when you place them in an assembly inside of Inventor.

Now that's not to say that you can open up your Inventor media, and find a series of folders full of Inventor *.ipt files and copy them locally.

This is a misconception I sometimes hear.  That on that media, is a whole bunch of *.ipt files you can get to.

The files actually contain the databases that build the components.  So when you place a component in an Inventor assembly, Content Center builds that component and places it into the assembly for you.  The functional word is "building".

The Place from Content Center Screen.  This is what's talking to your libraries

Content Center using the following procedure to build the parts.

1) A part is requested from the Content Center databases
2) It checks to see if the part has been published already.
3) If the answer is yes, it retrieves the part and places it in your assembly
4) If the answer is no, it builds it and puts it your Content Center directories, so it will be available for the next time.

So that's what they are?  But where to we keep them? 

There are actually two different answers to this one.  There's the Content Center stored locally (Desktop Content Center) or Content Center managed via your Vault Server Console.

Desktop Content Center works great for single users, or users who don't want to install the Autodesk Data Management Server on a network server for some reason.

The advantage is that this is a pretty simple model to work with, since everything resides locally on your machine.

The disadvantage is that only the machine the Desktop Content is installed on can use the libraries.  There's no sharing across machines.

So if you have several machines that are using Content Center, and you want to use Desktop Content, each machine will need to have it's own copy of the libraries.  This may not be too bad, but what happens when you start customizing your libraries?

The Desktop Content Libraries in their folder.

It can be tricky to manage indeed!

Content running through your Vault Server is intended for a central Content Center shared among several users.  Even if you're not using Vault, you can run Content from the Vault server.  You just don't use the "Vaultiness" of Vault.

The advantage of this model, is your Content is managed from one location.  The bad side?  You now have a server, network connections, and possibly even I.T. to work with.  So it can be a little more involved getting started.  Although since everyone is now on the same set of libraries, it can be easier to maintain.

Vault content (I only have two libraries right now)

So these are the two options we have available to us.  You'll have to decide which to use in your own application and install the appropriate one.

In Inventor, you can tell Inventor which it's using by going to Tools>Application Options, and choosing the Content Center Tab.

Selecting which content center your running.

That will choose where you're accessing Content Center from.  

Wow, that's a lot of writing!  So I'll save the rest for later.  Next, we'll talk about creating custom Content Center components!  

If you're wondering, I use Desktop Content.  Why?  It's actually, it's for a reason that is completely different than most will encounter. 

I'm constantly uninstalling and reinstalling Vaults.  Far more than the user in the "real world"  for that reason, I run a Desktop Content Vault.  That way I don't have to worry about which Vaults have what Content attached!  It's as simple as that!

Click here for Part 2: Creating Custom Content for Autodesk Inventor Content Center

ADDENDUM

Thanks to Paul Munford at The Cad Setter Out for pointing out that I overlooked a third way of using Desktop Content.

The third way would be to place the libraries on a server, and point the Desktop Content to that location in Application Options.  This would allow multiple users to access the same set of libraries, without having to install Vault on the server.

I've not used this way myself.  But this can be yet another way to organize your Content Center data! 

Using View Representations on an Autodesk Inventor Drawing

“Drawing is like making an expressive gesture with the advantage of permanence.”
 Henri Matisse

First of all, Happy New Year and welcome to 2012 everyone!

Wow, another year over!  Where did 2011 go!

And now.... My first post of 2012!

In last week's post, I talked about how you can create and reuse a View Representation in Autodesk Inventor.

As a continuation of this, I decided to show how you can reuse those View Representations on a drawing.

Selecting the View Rep when placing the view

It's actually not that difficult.  There's just a few tricks to be aware of.

I like to use it when I need to consistently turn off certain parts, as well as bring colors from the assembly onto to the drawing.  Usually when I'm drawing up a woodworking project, where I want a reasonable facsimile of the wood grain.

I also used it on a project where an enclosure was having several internal components being made visible & invisible as design changes were being made.

I admit, it took some getting used to, but view representations made it much easier to control the visibility of components on several different drawing sheets.

View Reps Doing their thing

Personally, I think it's one of those items that can really help someone, but is often overlooked.

So here we go with the video that continues what we started last week!




And for us old timers out there!  Who remembers what a View Representation used to be called?  Place an answer in the comments!

View Representations in Autodesk Inventor Assemblies - The Right Point of View

“Art is the concrete representation of our most subtle feelings.”
Agnes Martin

A few years ago, I created a blog post on using View Representations in Autodesk Inventor.  But this holiday weekend, I thought it might be worth redoing.  After all, I'm starting to get the hang of these videos!  (at least I think so).

You can see that text only post HERE. 

I also think that it's one of those things that is pretty useful, and is worth revisiting from time to time!

View Representations in the Assembly

So what is it that View Representations do that I think makes them so useful?

View representations remember three things about your Inventor assemblies:

1. Component Color
2. Component Visibility
3. Camera Angle

This can come in real handy when you need to represent components with different finishes, turn off several components repeatedly, or look at an assembly from a specific angle.

For example, I've often used to "omit components for clarity".  That condition that some parts must be hidden to show other parts underneath.  Particularly when I was working on some pretty complicated electronic enclosures a while back.

Uses for View Representations are many.  There are those who probably won't use them.  It's a slick tool, but as with every tool, not everyone has a use for them.  But there are also bound to be those who as; "Where have you been?"

So here's the video.  Take a look, and decide for yourself! 

Happy Holidays as we say our goodbyes to 2011, and head for 2012!

And for one more tip!  Check out the right click menu!  You have more options that just creating View Representations!  One I like is Copy.  If you need to create a new View Rep that's almost like one you already have, then just copy it, and make the changes!

Copy to Reuse a View Representation!

Windows User Account Control - The Ghost of Securities Past

“If everything seems under control, you're just not going fast enough.”
 Mario Andretti

If you've been following my blog, you may have noticed that I've slacked a bit on posting.  It's been a busy week of a business trip to Mexico for a day, a lot of demo prepping and installations as the year comes to a close, and a short vacation to Mammoth to catch my breath from it all.

But that doesn't mean that the lessons haven't stopped.

A couple of weeks ago, I ran into an issue caused by a demon I thought had finally gone a way.

User Account Control (UAC).  Found in Windows Vista and Windows 7, it helps secure your system against unauthorized changes. 

It's quite effective.  As a matter of fact, it's so effective, it can prevent programs you need to change your system from doing so, rendering that program unable to do important operations.

Like install, for example.

In recent years and software releases, the issue has gone away as Microsoft, and the programs that installed on it, have learned to coexist much more efficiently.

But recently, that little monster reared up again with an installation of Autodesk Simulation Multiphysics 2012 Service Pack 1 on Windows 7.

I received a tech call where a user was getting a cryptic MDAC error.  It was pretty cryptic, and definitely a little frightening. 

Here's the error, but what does it mean?

It didn't indicate what the error was at all, but once we had eliminated things like the user having appropriate privileges, virus scanners were off, etc.  I remembered one thing.

"UAC used to cause wacky things like this...."

So we went into the control panel, and turned off UAC. 

In Windows 7, pull the slider to the bottom!

Sure enough.  Once that was done, the install went through seamlessly.

Gone away the issues of UAC?  Not just yet!  If it's up to me, I turn if off.  If you ask what I think about you running it?  See the part where I turned it off.

Does that mean that you're going to encounter issues if you leave it on?  Not necessarily, but keep in mind that it can still cause issues (as experience taught me).

So if a program or service pack won't install.  Or if a program doesn't start, it's worth taking a look at UAC.  IF at all possible, shut if off, if only to eliminate it as a culprit.

It can save a headache or two!

And if you want more info on turning off UAC, there's a KETIV Tech Tip!

Note that the tip is for Windows Vista, but Windows 7 is very similar.

Off on Vacation for Me....

 “Vacation used to be a luxury, however, in today's world, it has become a necessity.”
~Anonymous

It's been a pretty busy and rewarding couple of weeks on the work front.

So this weekend I'm rewarding myself with a snowboarding trip to Mammoth Lakes, Ca.  As a result, I won't be doing much blogging this weekend, but I'll have something for you all later this week.

Until then, I'm hitting the slopes!  :-D

Sanctuary!

Getting Things in Gear - Exporting Gear Tooth Geometry in Autodesk Inventor

“You should always know when you're shifting gears in life. You should leave your era; it should never leave you.”
Leontyne Price

Earlier this week, I was asked, "How do you export accurate spur gear geometry from Autodesk Inventor's Design Accelerator."

I found myself frustrated.  Why?  Because I used to know exactly where it was, but it had been years since I'd be asked about it!  In that time, it had faded into the shadows of time. 

The set of gears "as generated" in Design Accelerator

Before I get too far along, I should make some distinctions about how Inventor creates gear geometry.   These are things I've picked up in my "sojourn through technology."

 The gears "as generated" from Design Accelerator are approximations.  If you zoom into the tooth profiles, their not the precise involute profiles that "proper gears" have.

Now that there's been a collective gasp of horror from the internet, don't fret!   For the purposes of laying out and specifying which gears to use, the gears as generated work just fine.  Critical items like ratios and center distances are accurate in this form.


But what if you want to make the gear?  Especially if you're running a test where you may make the gears in a rapid prototyping machine?

This is where exporting the accurate tooth geometry becomes important.

Now back to me scratching my head, trying to remember where I left that "Export Tooth Geometry" button!

So I hunted and conducted internet searches.  And low and behold!  I found it again!

All I had to do was right click on the "Spur Gears" icon in the browser!

There it is! Right click on the Design Acclerator icon!

Now that I've found it, I told myself I'd commit it to memory better this time.  And what better way to do it, than to create a video, blog it, and share it amongst cyber space!

Not to mention there may be those who like myself, have wondered if this is possible as well.  Perhaps they gave up searching for it, thinking that it doesn't exist.

Well it does!  So here's a video to show how it's done!

Enjoy!

AutoCAD Blocks and Autodesk Vault - An Unexpected Encounter

“The essence of wise living is anticipating the unanticipated and expecting the unexpected.”
Kevin A. Woolsey

Earlier this week, I was configuring Autodesk Vault to read properties from a title block in AutoCAD.  Usually, this is pretty straight forward.  Go through the steps like those on the Autodesk Wikihelp page, make sure the properties are mapped in Vault, verify the steps, and finally, serve and enjoy!

This day, I went through all the steps, I did my check, and...... (insert sound of needle dragging across a record)..... only some of the drawings would have their properties read in correctly.  Others were inexplicably blank.

A "reenactment" of what we saw.  I couldn't show customer data, so I had to create an example

Only some?  I'm standing there with the I.T. admin, and we're both puzzled.  If something went wrong, they all would have failed, not just a some!?!

We recreate one of the properties displaying the problem.  Maybe we made a mistake in mapping....

Nope.  That was done right.

Maybe we used the wrong tag from AutoCAD?  Maybe there are different tags in different drawings?

I jump into AutoCAD, open a problem file, and type "BATTMAN"  at the command line.  I start checking the Block Attribute Manager. 

The attributes are correct.  We didn't make a mistake there.

We repeat the process a few more times.  It all seems right.  Why? Why?  WHY!?!  We ask over and over.

We hadn't missed a step in Vault. 

Finally, after returning to AutoCAD and opening the Block Attribute Manager again, my eyes land upon something I've never noticed before.

There are two copies of the block in AutoCAD.  One is full of the pretty text we're trying to read into Vault.  The other....  as barren and empty as Death Valley on the Summer Solstice.

Two block!  In the end, there can only be one!

Vault was picking up data from the empty block! 

There was only one block required in the drawing.  Once we deleted that, everything started running exactly as expected.  We began breathing again!

I can't say you'll ever encounter this problem.  It can easily be said that it's one in a million. But it also does prove no matter how much you test, there's always something unexpected waiting in the wings.

So keep your eyes and mind open.  As Sherlock Holmes put it.  "Eliminate all other factors, and the one which remains must be the truth.

P.S.  Would you believe that this is the 300th blog post!  Thanks for all those who've supported me! 

Never Take a Tool For Granted - iMates in Autodesk Inventor

“The truth is rarely pure and never simple.”
Oscar Wilde

iMates in Autodesk Inventor.   I would often joke that the only time I used them was when I showed them in a class. (Click here for the Autodesk Wikihelp on iMates)

That was because I rarely, if ever used them.  I thought they were great for "plug in play" types of applications, where a finite pool of components was used to create a larger assembly.

Sure, there was the occasional exception, but they were specialized, and very few.  I only encountered one or two in my travels.

Over the years of using Inventor, iMates slowly crept into the back corner of my dusty mental attic.  A curiosity.  A footnote.

But one evening a few weeks ago, I had a wood working book open on my desk, and was taking some plans for a small table and recreating them in Inventor (with some additional details I wanted), and it happened.

I hit the case that made me run up to my mental attic and blow the dust off my old iMates.

The table, as rendered in Autodesk Showcase

Dowels were going to be used to pin the legs of the tables to the aprons.  I wanted to put the dowels in, so I could have an accurate bill of materials.

But each leg required four dowels, for a total of 16 dowels.  Placing 16 insert constraints was going to get old quick!  Especially when each insert constraint had to be flipped to provide the alternate solution.

So what did I do?

I created an iMate on the end of the dowel, building in the flip that was going to be necessary to get the dowels to position correctly.

Creating the iMate.  Notice the dialog box is nearly identical to the standard constraint (it's missing the "2" button)

When I placed it in an assembly, I could hold down the Alt key, and click on the iMate glyph with the left mouse button.

Then I could drag it, to the mating hole, and the iMate would take effect, and POP!  Into position it goes!


The nice part of this method, is that I can put this dowel in a library, and reuse it, and it's newly created iMate, again and again.

So what's the moral of this story?  Don't be too quick to use a tool!  While they may initially seem a curiosity, they have a way of coming back and making your life a lot easier! 

So to show the way I used iMates, here's a video with the whole process!  Enjoy!

And by the way!  This is just one way you can use iMates!  Remember that Wikihelp link at the beginning of this post?  It's got other ways you can use iMates to your advantage!

Life Lession - Never Quit Learning!

This weekend, I walk into the world of past, of history, and of legacy.
Jonathan Landeros

I spent this last weekend pursuing one of my "other passions".  I took a class on how to cover fabric aircraft components.  That's right.  Fabric.  Technology that has it's roots in the earliest days of aviation, although it's still used on some aircraft, even today.

It's been something I've been learning to do for the last few months as part of my volunteering at Planes of Fame.  It's challenging, at times frustrating, and always rewarding.

"So what?"  I've heard in many a demo I've presented.  "Why is this important?"

Because I think these lessons cross over.  I've found that things like this don't occur in a vacuum, and there are lessons that can be shared, at least in my own eyes.

So what did I learn from this class that I can apply to my greater world?

1) You often know more than you think.

My experience with covering in fabric is limited.  But even that limited knowledge of having done those steps before will give you a foundation to step forward.

There was more than one point where I was thinking, "I know this part!"

Fabric laid out across a control surface

2) You don't always know as much as you think.

The class was laying out stitching lines across a curve.  The problem involved was using basic right angle geometry.  We were confused on the measurement, and I was certain we should be measuring along the leg of the triangle, instead of the hypotenuse.

Another student thought it was the hypotenuse. 

True to my Irish/Mexican heritage, I allowed myself to become so sure that I was right about that measurement I stubbornly stuck to a position longer than I should have.  Then that light bulb finally when off.  It was the hypotenuse we should be using, I had to suffer through that embarrassing moment of feeling like an ass.  (Come on, admit it!  We've all been there!)

Those blue lines.  Where I so confidently blew my geometry.  :-(

3) Be open to learning new tricks.

Fabric covering is a process that has a lot of flexibility in it, as long as you follow the fundamentals of the process.

As a result, there was a lot of subjectivity in the way things were laid out.

There was more than once where things like, "I like this layout for the clean look."  or "I like this because it's easier to put together."  

Both layouts were structurally sound.  It was all subjective.

It was another example where "because we've always done it that way" wasn't reason enough.

Laying out tape.  As long as the tape meets specs, the look is what you like

4) Keep learning.

I was once told that this type of class is a "License to Learn".  I didn't leave this class knowing everything there was to know.  But I did leave the class knowing what I needed to know.  Not the least of which was how much more there was to learn.

But now this class leaves me with a strong foundation where I can carry on and continue my learning experience.

And after all that work, we tore it all off.  But the lessons learned are forever.

So those are my big lessons from my class.  I'll happily apply them to my own experiences at Planes of Fame, but they can always be applied in my CAD world at KETIV too.

After all, how many times, staring at a computer screen, have anyone of us:

1) Not said something because we had one too many doubts.
2) Opened our mouths, only to put our foot in it.
3) Seen somebody do something with a model or drawing and thought; "That's an interesting way of doing it!"
4) Walked out of a user group, classroom, or Autodesk University session and thought, "I don't know exactly what that instructor did, but I know where to look now!"

So what I've probably said here, in a lot of words, is: "Stay open minded and always keep learning!"

P.S. I've added a couple of more tips to the "Tips & Tricks" page.  Take a look!

Resetting Defaults in AutoCAD 2012 - You Arrived When I Wasn't Looking!

“Combined they could be extraordinary, but that doesn't [automatically] move them to the upper echelon. It puts them in the right path but not by default.”
Allen Weiner

This week I'm off at a two day seminar learning how to cover fabric surfaces on aircraft. 

In other words, if you're me, it's a major geek fest.

That's not a table cloth.  :-)

Since I'm spending the weekend in a hotel room, I'm not able to do much by way of video recording this week!

But that doesn't mean I can't offer up something!

I don't spend as much time in AutoCAD as I used to.  Most of the time, I'm working in Inventor, Vault, or Showcase.

But there are times I have to return to good old AutoCAD.  Like a trusty old friend, it's there for many tasks I still do, like editing dxf files, to minor edits on AutoCAD data from a different source.

The other day, I managed to break my AutoCAD.  And after trying to fix it the "old" way for an hour or two, I stumbled onto the new way. 

You know, the new way that does the job in about 15 seconds?

Back a few weeks ago, I was working on my laptop, and it just shut down.  Click.  Powered off with no warning.

I check that the power supply didn't come unplugged, and it hadn't.   Everything was powered the way it should be.

I check the underside of my laptop.  It's hot enough to fry an egg on.  I must have overheated it.  I'm in an air conditioned room, and I over heated my laptop?

I think it's time to check the cooling fans.

I finish the days task, grab the "Can o' Air", and blow a tribble or two out of my laptop's cooling fans.

I think I found my problem!

I fire up my laptop, and get a warning that my laptop did overheat.  Lovely.  It does some memory checks, and once again, is humming right along.

But a few days later, I go to fire up the AutoCAD 2012 that's part of AutoCAD Mechanical, and guess what.

All my toolbars have disappeared.  Every.  Single.  One.   Even the workspaces are gone.

So now what.  I know there are some settings I can erase that will prompt AutoCAD to reset it's toolbars.  So I search, and I search, and I search some more.

I searched so long, that my searcher was sore.

Then, during one of my searches, I find a "What's new" article for AutoCAD 2012.  What do I see?

There's a "Reset Defaults" button in AutoCAD!

What's this I see?  Reset Settings to Default?

I find the button, click it, and a few progress bars later, I'm back in action.

I can't say that I have a super tip for finding this.  I stumbled onto it through pure, dumb luck.

But I can share it and spread the word!  There's an easier way!

That's Not Supposed to Happen - Autodesk Vault 2012 - 1328 Error Installing Update 1

“A sudden, bold, and unexpected question doth many times surprise a man and lay him open”
Francis Bacon, Sr.

Recently, I was adding Update 1 to Autodesk Vault 2012.  I've done it plenty of times.  Should be a walk in the park, right?

If this install were a walk in the park, I wouldn't be spending the time writing this post! 

I run in the install.  And I get this error:

Eh?  What the?

Windows installer error 1328?  Error Applying Patch?  What? 

I check, I double check.  I double check the double checks.  Vault 2012 hasn't been updated.  It's still at "Update 0".  So it can't be "updated by other means"!

Does the user have Local Admin?  Check!

Virus scanners off?  Check!

UAC off?  Check!

Eh?  

I resort to the "Big Stick" in an Application Engineer's arsenal.  That's right.  The I call in the geek's equivalent of a B-52 air strike.

I Google it.  

Now, little Windows error... You will die.

I find the following blog post in, "Cracking the Vault" that tells me this isn't the first time it's come up. It's a *.dll file that's acting up.  Apparently it only affects "Vanilla" Vault.  The licensed versions (Vault Workgroup, Collaboration, & Professional), aren't affected.

But the good news is, I know that I'm not alone in the dark.  Now, how to fix it?

I try another Google search, then another.  After a few minutes, I have my solution.

In my best "Darth Vader" voice, I say: "I have you now!"

Except this time the perky rebel gets it.

It's found on the Autodesk discussion group, here. Near the top of the page.

It's a new *.dll!  I download it, do some swapping of files, and all is suddenly good. Progress bars move and hard drives whirr musically.

So to use a buzzword out of the corporate dictionary, what's the "take away"?  The "call to action"?

1. The obvious one.  If you run into this error, here's one way to solve it!  That's why I wrote this!
2. Google is your friend.  It can help you find documented solutions, even some undocumented solutions.  Although be careful with those, sometimes they can get you in trouble!

This is also one of those things that shouldn't be needed unless you actually run into the error.  So don't start swapping *.dlls because you can.  It's a "when necessary tool".

But when you're pinned down, it can be just the ticket to get you out!

UPDATE!  New hotfix released to repair this issue!

In my travels about the web, I found this hotfix that addresses this issue.  If you get this error (or one similar).  Install the hotfix found here!

The Tips Page - A Premier

“Language is the archives of history”
Ralph Waldo Emerson

As I've walked through my travels in "the industry", I've found that many times, it's not always a fancy feature, with chrome renderings, animations, or mutli-core whizbangs that users like.

Don't get me wrong, fancy features are always cool.  I use them quite a bit myself!

But sometimes, it's the little things, like having an automatic coffee maker, that make the daily grind a little easier.

Ohh.. Coffee maker. Like a good Inventor tip.  You make the day bearable.

They're tricks that are like "secret handshakes".  You don't see them in documentation, you only hear about them from another users that learned them from:  Where else?  Another user.

So, this week, I roll out a Tips and Tricks page on my blog.  It's a collection of those little tricks that I've picked up over time.  Not because I'm somehow more savvy than anyone else, just because I've had the good fortune of learning them.

The page is in development, so it will nearly certainly evolve over time.  I'll add more "tricks of the trade".  I may even change the layout a bit as I learn.

But here it is, in it's earliest form. I'm starting with Autodesk Inventor, but will likely add more procucts as I go.  They're set up with the intention of being browsed through in a few minutes, with links to more "in depth" explanations where possible.

Take a look!  Let me know what you think!  And most of all, enjoy!

Take a look HERE! 

Lock & Load: Loading Data into Autodesk Vault with Autoloader

“It's not the load that breaks you down - its the way you carry it”
Lou Holtz

Last week, I needed to show someone how to bulk load data into Autodesk Vault.  Typically, bulk loading data is done when a Vault "goes live", and loads existing data into Vault.  The data can be anything from AutoCAD data, Inventor data, even MS Office documents.

Thus this weeks video is inspired!  This video walks through how to use Autoloader.

It would be remiss of me not to mention two approaches to loading data into Vault.

The first is what I'm describing here, bulk load with Autoloader.

The benefits?
All the data can be loaded into Vault, flip the switch, and use Vault from that point forward.  We "flip a switch."

The drawbacks?
Autoloader doesn't want you loading files with broken links into Vault, so you'll have to resolve these before putting them in.  This can be enormously time consuming if you have a lot of broken links, and may require resources that just can't be dedicated to that task.

Autoloader found some broken links!  These have to get fixed!

The second, is "as we need it".  In other words, we'll use the current system we've been using, and all new projects will be placed in Vault. 

The benefit of this method?
Data can be culled to see what's getting put into Vault, and you can resolve broken links as you encounter them.  It's a "finer toothed comb".

The drawback?
Two systems are being maintained.  Which can complicate data management.  Not to mention that if the old system is still available, that "project inertia" can set it, where users never quite make the necessary commitment to Vault.

Which is the right one?  If you're expecting me to make a bold statement of which I believe the one method, I'm afraid I must disappoint you.

I don't believe there is one.  It's a decision that has to be based on a given situation, and where resources can be best utilized.  It depends on how broken your data is, and how much time you want to devote to using it. 

I've spent a month onsite fixing data before.  That's a lot of time fixing a lot of data.  For that company, the time was worth it, but can another company justify that?  Hard to say.  So I leave that question, "open ended".

What I can do, is give you a video showing you how you can use Autoloader.  It's a tool in your arsenal, and while it may not be the "ultimate weapon", it still gives you options when faced with getting data into Vault.