Busy Weekends, Avengers, and Learning from the Past

“The truth should never die. It is our mission to keep the true history of 'our' side alive for our descendants.”
Grady Howell

Another busy weekend has prevented me from putting together my next planned Inventor Publisher video.  I promise to get one out as soon as I can.

I can at least see the light of day with my current projects, and I'm pretty sure it's not an oncoming train!

But on a "tangent blog", I thought I'd share an anecdote picked up from my volunteer work at Planes of Fame in Chino, Ca.

I recently began learning out to recover control surfaces in fabric.  That's right.  The old school cloth and fabric rudders, ailerons, and elevators. 

My first assignment?  Not a trip to the shop to get dirty.  Start reading the manual.  Get familiar with the process, so you know what we're doing, and why we do it.

After that, I finally after a couple of weeks, I got to start working on a real project.  The rudder of a TBM Avenger.

The rudder of the Avenger looking from the bottom up.

The first thing I'm told before we start looking at it?  "This is more art than science."

We begin working.  Actually, they're doing more working, I'm doing more watching.  But I'm learning the art of tugging, stretching, and; cutting the fabric to fit around the curved surfaces of the rudder.

As the project progresses, the team stands up and studies a compound curve.  They discuss whether or not the material will shrink around a given bend when heated.  If it should be cut instead, and if so, where it has to be cut, and how many cuts are required.

And if we cut the fabric, here, that's going to have an effect two steps down the line, so that has to be considered too.  

It's an exercise in patience and planning.

So why would I put this in a blog?  This is about CAD software, not about seventy year old warbirds.

I put it in here because the planning of the project is as important as the process, maybe even more important.  Even the veterans of doing this have to check the manuals, stop and talk over a step in the process, and even step a way for a few minutes to pace around the hangar until inspiration comes.  (These are referred to as "coffee breaks").

Starts sounding a bit like an implementation, or maybe an installation or software upgrade, doesn't it?

So that's where my observations are this week.  A reaffirmation of all those times that I've wanted to charge ahead, get 'er done.  All those times I've wanted to "make it happen" so we can get to happy hour and high five for a job well done.

The same rudder, a little bit closer now.

What did I learn from those guys stretching the fabric on a 70 year old Avenger's rudder?  The experts know what they know, and they also know what they don't know.   

Don't neglect your planning.  And when you think the planning is done, self check yourself as you go forward.  You never know when you may learn a better way to do things.

And on that note, here's the aircraft that rudder belongs to.  This video was recorded when it flew at an event last year.

Autodesk Inventor Publisher - Creating Annotations

“He listens well who takes notes.”
Dante Alighieri

At long last.  Here's my next post for Autodesk Inventor Publisher.

In the last big post, we saw how we could adjust timing to get our time line to show the details when we need it.  Now in this post, we see how to add annotations to the post, so we can make sure we include as much key information as possible.


By using annotations, value can really be added to files you export out to the end users!

Here's the video to go with it.  Happy Inventor Publishing everyone!  

 

Still Working on the Next Blog, but for now, a Quick Publisher Tip

“We learned a lot and lost a lot of sleep.”
Mabel Smith

I still haven't had a chance to come up for air!  :-) 

It's been a hectic week working on some tests, a data creation project or two, plus our normal office duties at the KETIV homestead.

But I promise to have another, full featured, blog up by Monday (yes, it may have to go that long).

But until then.  Here's a short litttle Inventor Publisher tip I learned while working on one of my projects!

When moving components, click on the glyph to see options align the Triad, show your Trails, or restore your component to its home position.

A quick tip on Inventor Publisher Trails!

And on one last note.. We created a "commercial" for Autodesk Manufacturing Academy, and I got to be a part of it.  Feel free to check it out! 

A busy weekend. Blog delayed a bit

This weekend was a busy weekend composed of my usual volunteer gig at Planes of Fame on Saturday, and taken technical test for the new 2012 releases.

I love exams!  Don't you?

So instead of forcing out my next post at this late hour and putting out something half baked, I've decided to hold it back a day or two and make sure it's up to par. 

Look for the announcement on my Twitter feed, or just check the blog a little later! The next post will be on creating annotations in Autodesk Inventor Publisher!

Inventor Publisher - It's a Matter of Timing

“A little help at the right time is better than a lot of help at the wrong time.”
Proverb

Last week's blog saw us explode an assembly inside of Autodesk Inventor Publisher.

Of course, this is the first step of many we can take.  We might intend to place these in a document format for a technical manual, or perhaps create a video that can be put on the web or a mobile device.

But before we send that data to whatever it's final destination is, why don't we use the storyboard to add as much critical information as possible, as well as make sure that the assembly shows all the information it needs as it comes apart and goes together.

 

The Inventor Publisher Storyboard

So in this week's video, we see how to add descriptions, and adjust timing in our storyboard!

There we go!  Happy Inventor Publishing!  :-)

Autodesk Inventor Publisher - If You Don't Write it Down, It Didn't Happen

“Real programmers don't document. If it was hard to write, it should be hard to understand.”
Unknown

I'll admit, I always thought Autodesk Inventor Publisher was a just a "cool program".  The power of being able to create documentation was impressive, but I asked myself the question, "What does it do that I can't do using presentation files?"

Trust me.  Creating exploded views are just the start!

I told myself, "I'll have to look into it's capabilities later on".  

Then, time marched on.  I found myself working on Vault, on Inventor, on Showcase.  Every once in a while, I'd stick my head up and say, "I need to get back into Inventor Publisher."  Then I'd put my head back down and carry on as I had before.

Nearly a year ago, I saw a presentation on Inventor Publisher's capabilities, and I finally "got it".  I understood the power of being able to create documentation directly from your 3D model.  It can create in in 2D pdfs, publish to a mobile device, you can even use it to create Flash movies!  I get it! I get it! 

I really facepalmed myself for not seeing it sooner.  

Now, at long last, I've found the time (alright I'll come clean, I made the time) to take a deep look at Inventor Publisher.

The more I use it, the more I like it.

So I've decided to create a short series on Inventor Publisher.  Here's the first installment, inserting a 3D model and creating a timeline in Inventor Publisher.  We're just getting started.  I'm going to add more in the up coming weeks!

On the Road Again - Autodesk Inventor Publisher Viewer

“We are in or are entering TWO cycles instead of one — broadband Internet and mobile.”
Mary Meeker

 I just got back from my July Snowboarding Trip.  That's right, July snowboarding.

Even up there, I couldn't complete stop thinking about CAD, so between runs, while sitting at the watering hole, enjoying the sun reflecting off the slushy snow, I was thinking about CAD.

I wonder if there's a support group for that....

That's me, on the 4th of July at the top of Mammoth Mountain

What I'm going to blog on today isn't exactly earth shattering.  I'm talking about Autodesk Inventor Publisher Mobile viewer.

First, what is Autodesk Inventor Publisher?  Inventor Publisher let's you create technical documentation, from a 2D instructions in a traditional format, or in 3D interactive formats.

If you've never seen Inventor Publisher before.  Rob Cohee does a nice job describing it here.

If you've heard of Inventor Publisher, then you probably have heard of the mobile applications Autodesk Inventor Publisher Viewer, available at no charge on the Apple Store and Android Market.

Once again, I'll rely on Rob Cohee's excellent work.  It would be a shame for it to go to waste, and I didn't get a chance to create my own, being on vacation and all!

Wonderful!  If you have Inventor Publisher, you can publisher them to your mobile device.  The Coefficient of Really Cool pegs the meter at a 9+. 

But now we get to the part of the story where I thought things got interesting.

I was talking to someone about Inventor Publisher Mobile, and they stated, "I'm not giving our shop, iPads.  They're too expensive and we can't afford to have them get broken."

Fair enough!  I think of how long an iPad would last in the restoration hangar at Planes of Fame.  Probably not long.

Could you picture an iPad or Droid plummeting to its death off the top of this Avenger?  I can.

But that doesn't mean that the mobile apps are immediately not an option.  How many technical folks out there have personal Android phones, iPhones, or iPads we carry around?

I'm on a Droid!

I'm on an iPad!

Sure if you make components with "some assembly required", you can make the files available on your website.  But what you don't do that?

To put it simply.  I told this user to keep their options open.  The shop is just one place you can use the mobile applications!

What if you have someone off site, in a different facility somewhere.  Maybe they aren't "on the floor", but they need a quick reference of an assembly?  Perhaps they don't have Inventor Publisher itself, and dealing with your laptop's boot time is a nuisance (I've been known to put something off because I didn't feel like waiting for my laptop to boot).

Then Inventor Publisher Mobile becomes an option.  It's quick and it's interactive.  You can zoom in on parts and inspect the assembly operations up close.

So the morale of the story?  Don't limit yourself.  Inventor Publisher Mobile applications just aren't for the shop.  They're for anyone who can take advantage of them!

I'm On Vacation this Week

Good morning, everyone!

Once again, I'm delaying this weeks blog post.

It's Independence Weekend in the U.S., and I took a snowboarding vacation to Mammoth Mountain. 

That's right, snowboarding in July, in the Northern Hemisphere! 

I'll be putting something up a little later, in the meantime, I've got one more day to go enjoy the slopes.

Hiding the Skeleton in Frame Generator Part 2 - Using a Reference Part.

Being ignorant is not so much a shame, as being unwilling to learn.
Benjamin Franklin

Okay, this post didn't quite come out at the end of the week like I promised.  Last week got busy, with trips to Fresno, demos, and a million other little things taking up most of my time.

So finally, here's the post I've been promising.

In my last blog post.  I showed how to hide the skeleton component when using Frame Generator.  In that video, I used a phantom component to do so.

A very astute reader,  Piou2fois,  pointed out that even though the skeleton has been made a Phantom component, it's mass is still added to the overall mass to the assembly.  This can result in an erroneously high number if you're using a solid as your skeleton.

Piou2fois pointed out that by using a Reference Component instead of a Phantom component, the skeleton's mass will be removed from the calculations and you'll get an accurate result for your overall mass.

Use "Reference" instead of "Phantom"

Thanks for the correction, Piou2fois!  Keep it up!

Here's the video showing all the steps!

This Week's Blog Post Delayed

I'm afraid that I have to delay this weeks blog post for a bit due to visiting friends and family. 

Yes, even I have them! 

I'll be posting later this week, so watch the Twitter feed for my announcement! 

Talk to you all later this week!

Hiding the Skeleton Part in Your Inventor Frame Generator

“If you cannot get rid of the family skeleton, you may as well make it dance.”
George Bernard Shaw


Many a blog post has been inspired by a simple question.  This post is definitely one that came out of the "How can I get rid of the skeleton model used for Inventor's Frame Generator." 

Since the skeleton is part, by default, Inventor counts it as a component when we use it to make a frame with Frame Generator.  Every frame created using Frame Generator has one.

This leaves us with an extra part, one that Inventor uses for it's purposes, but will never exist in the real world.

Wouldn't it be great if we could make that component a "ghost" component?  Maybe like a "phantom"?

I'm playing on words, Inventor does have phantom components, and just like their name implies, they're intended to help us build our assemblies, but may not be part of the "real world" design.

In short, you can edit the Bill of Materials from the Assembly tab in your Inventor assembly, and change the BOM structure there.

First, edit the Bill of Materials

Then you can change the structure

 Naturally, there has to be a video to go with it.  So here it is!  Enjoy!

And by the way! If your new to Frame Generator, Rob Cohee has some nice videos HERE on how to use Frame generator!

Publishing a Downloaded Valve to Inventor's Content Center

“The biggest difference between time and space is that you can't reuse time”
Merrick Furst

This weekend I was put forth the challenge to "Build a valve from this website, then use it in an Inventor Design".

I went to the website to get the specifications, and found that the company had already published their content for you to download, which is becoming quite common these days.

The downloaded valve

So why rebuild it?  I'm sure you could make a case for having full control over the model, since you decide how it's built.  But then again, why spend your time, and money, building another company's part if they've already supplied it?  It might take you a couple of hours to build it, when you can download it in a few minutes.

So I decided to go ahead and download the part.  Then show how you can publish it to content center, straight from the website.  And many times, the part has all the accuracy you need for it's proper integration in the design.

So the next time you think about building a vendor part, make sure they haven't done the heavy lifting for you.

After all, isn't good engineering about not reinventing the wheel?

Setting Default Project in Autodesk Vault 2012

“Instruction does not prevent wasted time or mistakes; and mistakes themselves are often the best teachers of all.”
James Anthony Froude

Like so many of us, I'm guilty of ignoring instructions. 

When I installed Autodesk Vault 2012, I used the same migration procedure I've used for the last few releases.  Surely nothing could change, right?

Wrong!  I used Vault quite happily for the first couple of days.  Then I needed to use the Copy Design tool.

Poof!  I get this new error I've never seen before.

Hello.  What's this?

Projects?  I need to set a default project?  Since when?

I finally break down and read the directions.  As your typical male.  This is difficult for me.  As a matter of fact, I may deny this at a later date.  

Well, since the new version of Vault allowed us to enforce a default project!  If I had read the directions, I would have learned that!  

So what does the default project let us do?  It allows us to choose a project that is going to run our Vault.  It helps prevent us from having file associations get confused, as can happen when multiple project files exist in Vault, and makes sure all our users are on the the "same page" as it were.

It can be set in Tools>Administration>Vault Options

Setting the Default Project at an administrative level

Now that it's set, I like this tool.  It helps me keep things more consistent, and predictable.  But the first time I saw that error, it was unnerving indeed!

So what is the moral of the story!  Read the directions!  You'll avoid surprises! 

Here's a video on my experiences with this particular function!

This Week's Blog Post Delayed for the Holiday

This weekend is Memorial Day in the United States. 

So we're taking a long weekend to honor those who served the country over its history.    

As a result this weeks post will be pushed back a few days (it'll be up by mid week, check my Twitter feed for the announcement).

I hope everyone is having a great weekend!

And as a final note, thanks to all those soldiers how served, and thanks to all those soldiers from other countries, who have stood as our allies. 

The famous "Missing Man' formation.  Image courtesy of David C. Copley

Using Positional Representations in Autodesk Inventor Drawings

“Painting is the representation of visible forms. . . The essence of realism is its negation of the ideal.”
Gustave Courbet

For this week's blog.  I decided to continue last weeks blog! 

Last week I showed a video on how to create Positional Representations in an Autodesk Inventor Assembly.  But did you know that you can also show those Positional Representations on a drawing as an overlay view?

An example of a Positional Representation Overlay on a shaded view.

 


It comes in handy when you need to show alternate positions, such as extended vs retracted, or open vs closed.  Inventor will even create the overlay as reference lines for you, and you can dimension to either positional representation, so you can show the dimensions of each position.

It's a really hand way of bringing things full circle!

Here's the video!  Happy Inventing!

The Updates Have Arrived - Service Pack 2 for Autodesk Inventor 2011

Chaos reigns within.
Reflect, repent, and reboot.
Order shall return.
~Suzie Wagner, 1998

I found out that Service Pack 2 for Autodesk Inventor is out today.  You can download it from the link:  HERE

Installing is usually pretty easy.  But there are a few things to know before you get started.

• There are different Service Packs for 32 bit and 64 bit installations.  Make sure you download the correct one for your operating system
• Autodesk Inventor Service Pack 2 is an "Incremental Update".  Translation:  You'll need to download and install Service Pack 1 before installing Service Pack 2
•  If you've installed the Subscription Advantage Pack, there's a different Service Pack 2 for you.

Don't worry, they're all located at the same link above.  It's just a matter of knowing which one to get.

If you don't know the answer to any of the above questions, you can check at at Help>About Autodesk Inventor

Finding the "About" screen

You'll see this dialog box come up, and this contains a lot of information about Inventor's current "Build". 

Autodesk Inventor information screen.  Note the "64 Bit" & Build Numbers

I've circled the Build Number and 64 Bit areas of my screen.  These are the ones worth noting.

Are you wondering which build number corresponds to which Service Pack level?  Autodesk has a tech document at the link HERE.  It's a great reference to help you out.

 Lastly, if you try to install the service pack, and you get this error:

This isn't as scary as it looks.  Typically, the "Wrong Version" or "Missing Program" the Windows Installer is referring to is caused by one of the following:

• You're trying to install a 32 bit patch to a 64 bit system
• You haven't installed Service Pack 1 yet
• You're trying to install a Subscription Advantage Pack SP2 on a system that doesn't have the Advantage Pack installed, or vice versa.

That's it!  Once you know the tricks, it's pretty straight forward!

Using Positional Representations in Autodesk Inventor

“Everyone is jockeying for position in a rapidly changing world and industry.”
Jeff Kagan

I have discovered that I can sometimes have a memory like a steel sieve. 

Not that long ago, I was teaching in class, and the question came up: "How can I show alternate positions, like fully extended and fully retracted, inside Inventor.

"Positional Representations are perfect for showing exactly that."  I say. "I have a video for that!"  I continue triumphantly. 

Those of you who've been in a class, or in one of my presentations have probably heard me say that. 

Sometimes I even imaging myself in that "Captain Morgan's" pose.

I go to locate my video, and suddenly I feel a bit sheepish. 

I don't have one.  I must have never created the video I swore I had created! 

So, in order to rectify that particular situation, here you go, a video on creating positional representations in Autodesk Inventor.

Planes of Fame Airshow - Blog Delayed.

“Lady, you want me to answer you if this old airplane is safe to fly? Just how in the world do you think it got to be this old?.”    ~ Anonymous

This weekend I spent nearly every waking moment at the Planes of Fame Airshow, getting my warbird fix.  

Which means after one heck of a cool weekend, I don't have much of a brain left for blogging. 

 Look to a little later this week for my technical post.  It's coming.  But until then, enjoy some pictures from the show!  

Two Corsairs flying in formation

A rare WWII PV-2 Harpoon

A collection of Douglass aircraft from over the years, an SBD Dautnless, an AD Skyraider, and an A-4 Skyhawk

Two P-40 Warhawks

The N9MB Flying Wing.  The only one of its type flying.

Two F7F Tigercats and two P-51s in the twilight after the show was over.

How's Your Form - iLogic Forms in Autodesk Inventor 2012

“I know it may seem surprising to people, but learning dialog that has a conversational flow to it is not that difficult.”
Deidre Hall

I'm not a Visual Basic programmer.  That much is apparent pretty quickly.  I can create a dialog box in VB, but it can be a process of determination winning over skill.

Now, in Autodesk Inventor 2012 iLogic provides the ability to quickly create a form (read dialog box), without having to be a Visual Basic genius.

So one night, I sat down and tried creating a form on a Inventor 2011 template I created.

The template changes the joints on the end of a wooden board from a tenon (tabbed) joint, to a regular joint.

All I can say is that I was amazed at how easy it really is.  I had it done in a few minutes.

I'm not joking, it really is that easy.

Here's my finished form.  I'm not kidding.  Less than 5 minutes!

So here's the video everyone.  Don't be intimidated by it!

New for Autodesk Inventor 2012 - Rotate Sketch with View

 “You can't do sketches enough. Sketch everything and keep your curiosity fresh.”
John Singer Sargent

Subtle, but significant.  I've used the term before.

I like to use it for tools that don't necessarily have a lot of flash or pizazz, but are good steady tools that are really useful when needed.

One of these 'hidden gems' of a tool is the ability to attach sketches to your drawing views, and then have them keep their orientation relative to those views, even when the views are rotated.

So did everyone get that?

It's tough to describe in a few words, so here, of course, is a video.