A Post for KETIV - Walking Through History at the Planes of Fame Airshow.

For those of you who know me, even if it's only via the Internet, it's no secret that I like vintage aircraft.  I find the stories about them fascinating, and the people who designed, built, flew,and maintained them fascinating too.

The Grumman F7F Tigercat in front.  Two Vought Corsairs in the background.

Last week, my bosses at KETIV Technologies asked me to write a blog post on the Planes of Fame airshow, and I found myself struggling with quite the case of writer's block.  So much to say, and how to say it.

Fortunately, I was able to put thoughts to virtual paper, and come up with something, and now it's been shared to the KETIV website.

So rather than repost it here, go ahead and follow the link to the KETIV blog here.

I hope you enjoy the article, and here's a couple of bonus pictures for passing through my blog on the way there! :) 

A Douglass C-47.  A loyal, dependable, workhorse of an airplane.

A Lockheed P-38 Lightning, of World War 2 fame, taxiing between two
North American P-51 Mustangs after a flight.

Later on, a F-22 Raptor flew.  State of the art today, here it is taxiing back
between the same two Mustangs.

Springtime Changes! Upgrading to Autodesk Vault 2016

It's time to start my springtime upgrade to my Autodesk 2016 based products.  And I've decided to share my upgrade process again.  I hope that this helps you along your way as you consider your own upgrades.

I'm running Autodesk Factory Design Suite 2015, with Autodesk Vault Professional 2016.

Because of that configuration, I'm going to start with upgrading my server to Vault Professional 2016.

Why?  Vault Professional 2016 can run my 2015 and 2014 based products. So my new Vault server can support my 2014 and 2015 base products.  So if I can't upgrade Factory Design Suite right away, I can still access my Vault files.

You might think the next step is to click on that pretty, shiny, setup.exe file, but I would suggest considering a few things first.

• Check the server's system requirements.  Do you need up upgrade SQL?  Is there enough hard drive space?  Is the server's hostname "Wheezy", because that's an accurate description of it's current condition? 
• Do you have your Vault backed up?  And just because it was running fine the last time you checked, before going to the company Christmas party doesn't mean it still is.  Check again! 
• Consider running a test upgrade off line, if you have the capabilty.  And just because you've got a new server you've named NCC-1701 (you clever geek, you!), you might give Wheezy one last shot at glory before consigning to the Great Beyond.  Use it to test your migration off line! 
• Finally, if you have any network licensed products, like Vault Professional, for example, get those licenses ahead of time!  You're going to need them! 

I know preparation steps aren't fun, and they seem like a lot of extra work.  I rarely see a Vault migration go wrong, but the Titanic was making great time when it hit the iceberg.  You never want to be remembered as "the CAD manager who shut down engineering".

So now, the preparation steps are done. The backups are checked, verified.  Finally, it's time to run that backup.  

Now, click on the Setup.exe file that you've been getting excited about. 

Launching the Setup.exe

Once the setup initializes, run the precheck.  This is going to identify if there are any issues that need to be resolved before proceeding.

If you're used to 2015, the precheck has it's own button now

In my case, I did have an AutodeskDM directory already existing.  But if you get any error, click on the link.

Looks like we have a little fixing to do!

A list of possible solutions will appear.  I was able to resolve my issue by following the instructions listed.

Deleting the AutodeskDM directory per  the solution fixed my issue.

Run the precheck again to make sure that all issues are resolved.  Once the precheck is clean, click Install.

Now, we install! 

Next up is the End User License Agreement, or EULA.  Accept it and move on.  That's pretty much all there is here! 

Read this carefully (I know you do!), accept and continue!

After accepting the EULA, it's time to enter your serial number, product key, and if you're using  Vault Workgroup, or Vault Professional, your license server. 

Entering the information you need,. 

Clicking the next button will now ask you if you want to install with a new configuration, or with the previous configuration from your existing Vault. 

In my case, I'm using my previous configuration, so I choose that. 

Do you want to use the new configuration or default? 

Now, Vault will ask you which components to install, as well as what location your going to install to.  In my case, I'm using my D drive, so I change the install location. 

Now we get to hit the button we've been waiting for, Install.  (Cue music to 2001)

All I need to do is change my location here.

There's one more advisory that appears.  Vault tells us that it's detected an existing database, and in order to be useable, we're going to have to migrate it. 

This is just advising you that you'll need to\
igrate your existing database to make it useable. 

In this case, the point is to migrate it, so we'll say yes.

The install goes for a few minutes, depending on your machine.  The installer will run prechecks again, removed the old Autodesk Data Management Console, and install the 2016 version. 

Now we wait for the install.

Once the installer completes, you'll see your "Success" screen.  Take a second and pat yourself on the back!

If you're migrating an existing Vault, as I am here, You'll see another message to open your ADMS Console to migrate your databases.  It's a good idea to do that now. 

Starting the console to star the database migration.

The Autodesk Data Management Console will open and ask you to log in, and begin migrating the necessary databases. 

This is the process of migrating.  This can sometimes take a while for
large datasets.

 One more message is going to come through.  Vault is going to ask if I want to migrate my Vaults and custom libraries.  Which in this example, is what I want do to, so I'll answer yes. 

Choosing which databases to migrate.

One more question comes up, and it's one worth noting. Vault is going to ask which versions of Inventor you want to have your custom Content Center  Libraries available for.  In my case, I work with Inventor 2014, 2015, and 2016, so I'll  keep all three.

This is a good time to get rid of any unused libraries, it will make backups run a little quicker, and will save a little hard drive space.

Which versions of Inventor do you want your custom libraries available for? 

Once this is accepted, the final migrations are complete, and everything is done.

Now, just reconfigure, and validate your backups, and you're ready to go on to the next step!

In my case, installing my 2016 based client software!

Stay tuned!

P.S. I'm hoping to build a video for this as well, but videos take a while to create, particularly this one!

Look for it to be added in a future date! 

A Little Side Project Now Shared on GrabCAD - The NutPlate iPart

Every so often I like to create content just for the fun of creating it.

It does keep me practicing my Inventor skills, and sometimes, I just enjoy doing it.

One thing I've been doing over the course of the last few months has been creating some standard aviation style hardware.  I've created them as iParts, similar to I have in similar posts.

In this case, I've created a nut plate based on the part number NASM21047.  I found this data on the Coast Fabrication website, which I've found to be a great resource for these types of components

A sample of the nutplate iPart. 

I've created the parts using the same methods as in my post from a few months ago.  The steps are largely the same, so I won't recreate those steps here.  They're already in that post.

However, there are a couple of differences that are worth pointing out in this new version.

In this model, I've suppressed features in some of my iPart members.  This is because some of variations have a counterbore in the bottom, and others don't.  As a result, you'll see lines where the counterbore features, and the feature attached to them, are suppressed.

Features that need to be Suppressed for some family members can be added on the Suppression tab.

A Suppression Column.  I like to type out the words myself.

Suppression and compression of a feature by typing one of several values in the field.

Suppress a feature by entering one of the following:

• Suppress
• suppress
• S
• s
• 0

Compute (turn on) a feature with one of the following.

• Compute
• compute
• C
• c
• 1

I've also added a material column this time around, this makes sure the mass is accurate for each variation as well.

You can tell a column to be a Material column by right clicking on the header, and selecting the Material Column option.  Then type in the material you want in the field.

Notice the Material Column

Mostly, I just want to create a sample that you can use to get ideas how to create an iPart, or use this as inspiration to build your own iPart!

After all, why do the work if it's not going to be shared.  The iPart was built in Inventor 2015.

Take a look at the GrabCAD link here!  A login is required, but it's free! Download and enjoy!

Alternately, here's an another link to the iPart that doesn't require a login!

On one last note, I've done my best to make sure the dimensions are accurate, but there's always the chance I missed something.  It never hurts to check.

And if I missed something, let me know!  I'll do my best to correct it!

Automatic Material Thickness Detection in Sheet Metal - New in Autodesk Inventor 2016

Having returned from a trip to Arizona, I felt it was time to walk a bit more deeply into one of Inventor 2016's new features.

And I'm going to choose the automatic thickness detection in sheet metal.

In short, when converting a model to sheet metal, Inventor 2016 automatically detects the material thickness, versus the "measure and copy" method of previous Inventor versions.

The process starts out with a part in the Inventor part modeling environment.  In my test, I used a base solid, as you might see in an imported file.  It's currently a "standard" Inventor part, and hasn't been turned into a sheet metal component.

Starting with a model that needs to be converted to sheet metal

First, it's converted to sheet metal with the Convert to Sheet Metal icon.

Now, convert to sheet metal.

After selecting this icon, Inventor is going to ask you to select a base face. This face represents the face that Inventor is going to unfold around.   This is what will help Inventor find the sheet metal thickness for you.

Select the base face for unfolding

Once you select the base face, Inventor will open the Sheet Metal Defaults dialog box, and display the thickness as measured in the Thickness field.

The Sheet Metal Defaults screen confirming the sheet metal thickness

Beyond that, there's not much left to do but carry on!  The sheet metal thickness is measured, and now you can begin using your sheet metal tools!

Time to start modeling! 

Give it a try!  It's worked pretty well for me so far.  I've downloaded two models from GrabCAD, and both worked just fine!

And if you see this post in video form, here it is below!

What's New in Inventor 2016 - Sheet Metal

Sheet metal has had some nice improvements in Inventor.  Speaking for myself, I think there are some pretty exciting features.

So what are some of these new features?

1) Multi-body is now supported in sheet metal.  Now you can create multiple sheet metal bodies in a single part file.  This gives an opportunity for whole new ways of laying out components in Inventor!  Create geometry in both solids, then create separate components from the solids!

Notice the two bodies in the browser

2) Zero bend radius.  I've heard this one requested from time to time, and when I say "time to time", I mean "all the time". Quite simply, it's the ability to create a bend with zero radius.  No more red in the bend radius field when you want to make that sharp corner!

No red text in the Bend Radius field

3) Auto detect material thickness.  When using imported components into the sheet metal environment, Inventor now has the ability to detect the material thickness.  One manual step saved!

Thickness is automatically detected on import

4) Punch tool shows number of instances. The punch tool will show the number of instances in the dialog box when placing them.  It's a simple thing, but a nice thing to know before you commit the command.

So there are four quick bullet points on what's new in Autodesk Inventor 2016 sheet metal.  I'm planning on creating some more posts that will go into a little more detail on how to use these tools, and I'm hoping to do that soon.

Stay tuned!

What's new in Autodesk Inventor 2016 - Text in Drawings

In this post, I decided to continue with my discussion on what's new in Autodesk Inventor drawings.

This time, I thought I'd share some of the text improvements that have come a long inside of Inventor.  

First, the dialog box has been changed slightly.  Primarily the layout has been changed, mostly to help organize and streamline things a bit.  

2015 on the left, 2016 on the right

But if you look closer at the screen, you'll also see a few new buttons.  Notice that there's now buttons for bullets and numbering, as well as a button for strike-through.  Now you can create this formatting right in the text box.

The location of the new Bullet, Numbering, & Strikethrough icons.

Also, if you copy from Microsoft Word into Inventor's text box, any bullets and numbering used is kept, so you can change it after it's been placed. 

Just copy and paste and the formatting is preserved.

You might also notice that the Zoom in and out arrows are gone.  But the functionality remains!  Now hold down the CNTL key and scroll the mouse wheel to zoom text in and out.

Once again we have 2015 on the right and 2016 on the left. 

Another nice little add is the ability to change case.  Do you want to force text to have ALL CAPS, all lower case, or Set To Title Case?  That's been added now too!

An example using the ALL CAPS setting

The symbol list has been changed too this should make it easier to locate the symbol you want. 

The reorganized symbol library

And did you notice something in the above screenshots?  There's a preview on the drawing sheet as you type the text.  That's not a trick of screen capture editing, that's the real deal. 

The preview on your drawing, you can see your results as you type!

Finally, should you need to rotate your text, you have the option to do so on screen.  Just grab the blue grip with your mouse, and rotate to the angle you want.

Rotating by dragging on the drawing canvas

And if you still prefer to rotate precisely, you can still do that in the dialog box. 

Changing the text rotation via the dialog box. 

And that's it for now!  A few of the improvements in text editing in Autodesk Inventor 2016.

I can't create a video for this one I'm afraid.  I'm on the road so I don't have any of my video gear with me!

I hope to add one later! 

Transparent Parts in Autodesk Inventor 2016 Drawings - It's New!

This weekend, I finally had an opportunity to start truly testing out my new install of Autodesk Inventor 2016.

And there is a ton of new features out there.  A great list was compiled by Design and Motion in their post here.

But in my post here, I thought I'd delve into just one of the features a little more deeply.

The feature I chose first was creating transparent parts in a drawing.

It's a very common thing.  An assembly contains components that are made out of some sort of clear material.  Glass, Lexan, so on.

For my example.  I've created a representation of an aircraft window.

The sample file

It's not a perfectly engineered design, but it does show the new functionality nicely.

In versions previous to Inventor 2016, the only way to show the part as transparent was to render the view, which while effective, wasn't always desirable.

Rendered views on a drawing

However, if you turn off rendering, the part now looks like a solid plate, and nothing like the clear glass it's supposed to represent.

Now the window looks like a hatch!

But now Inventor 2016 offers a new option.  The ability to show a component as transparent.

The first step to make the window transparent is to change your selection filter to Select Part Priority.

Switching selection priority

Now, select the part you want to make transparent, in this case, it's the window, and choose the Transparent option.

Making a component transparent. 

The view will recalculate, and now the edges behind the part will appear as they would if the part were transparent.

The isometric view is now transparent

And if you need to, you can choose which views have transparency!  It doesn't have to be all or nothing!

Both views transparent!

So as upgrade time begins this spring, take a look at the new transparency setting in Inventor 2016!  It could be one of those small things that makes life much easier!

And below, here's a video showing the same functionality!  Enjoy!

Autodesk Inventor 2016 What's New!

Autodesk seems to have released the what's new information for Inventor 2016!  Thanks to Design and Motion and InventorTopix for sharing the info!

This represents the excitement I feel come release time.
(Image courtesy of theoatmeal.com)

There are some cool features I can't wait to get into!

Since Design and Motion and InventorTopix did all the hard work, I won't steal the credit that should be theirs by cutting and pasting.

You can find the information for the posts at Design and Motion here, and InventorTopix here! 

Thanks to them for sharing! 

KETIV Introduces the Autodesk Vault "DIY Kit"

I think Autodesk Vault is a great tool.  I've use in in my personal "just joy of CAD" projects, and it's helped me be more effective when working in a production environment.

My Craftsman style coffee table.  It's been in Vault for years. 

Just the ability to go back and retrieve a previous version can be a lifesaver when a mistake is made (not that we ever do that!), or when a design changes, and it's important to retrieve a previous iteration.

But no matter how you slice it, properly installing, configuring, and using Vault effectively takes time, and planning.

And even thought "a journey of a thousand miles begins with a single step", the fast paced world of design can sometimes keep us dancing and we never take that all important first step.

In light of that reality, my colleagues at KETIV decided to "give you a lift", if you forgive me continuing the pun, and introduced a "Do it Yourself" kit for getting started with Vault.

Based on Vault Basic 2015, the DIY kit includes everything you need to get started with Autodesk Vault.

It includes videos to help you understand the components that form the framework of Vault, as well as describe the installation and basic functions of Vault.

It even gives you access to a Vault backup including sample data and preconfigured users and roles to get you started on the journey.

A screen capture from the Autodesk "Vault DIY Kit".

So if your interested in starting your journey, but weren't quite sure if you were ready to take that first step, here's the link to to the KETIV DIY Vault kit to get you started.

Maybe the thousand mile journey starts with a single step, but nobody said that the first step couldn't be into a classy ride with air conditioning, a comfortable ride, and a sweet sound system!