Pack up and go! Using Autodesk Inventor's Pack and Go Tool

“Like the circus, it needs to pack up and go.”
Kim Williams


There are times when I find I have to take a series of Autodesk Inventor files, and collect them for electronic transmission.  It can also be used to archive projects, although these days I use Vault for that mostly.

The tool I use to collect these series of files is called "Pack and Go".  Pack and go scans an inventor file, looks for the files it uses, and puts them in designated spot where they can be zipped and sent out.

For this blog post.  I'm going to borrow my Router Jig that I I like to use for one of my common examples.

My Pack and Go example today

• I think one of the most direct ways to start the Pack and Go Operation is to have the assembly open.  The Pack and Go utility can be accessed from the Applications Icon (the "Big I")>Save As> Pack and Go.

• The Pack and Go dialog will open up.  The first thing I like to do, is expand the dialog to it's fullest by clicking the "More" button.  This makes sure I have all the options available to me.  Even though they may be grayed out at first, they'll light up a few steps later!

Click "More" to see all options

There's an additional search that gets used later!

• Now I choose my options for my Pack and Go operation.  Here are the options I typically use, although yours may vary based on what you're desired output is.  The help system has a good reference for the settings, so that's where all the good info can be found.

Destination Folder: Usually I just use my desktop. Typically once sent, I delete the packed files.

Copy to Single path (checked): I like to consolidate my files as much as possible.

Include Linked Files (checked):  This includes linked "non" Inventor files such as Excel, or text documents.  I check it just to make sure I don't leave any out.

Skip Libraries (checked): This makes sure I get any files in library locations.  I like to make sure I get everything I can.

Collect Workgroups (checked):   Collects files in workgroup locations into one location when packed.  I check this because just like above, I like consolidating.

Skip Styles (checked):  Leaves out the styles.  Leaves the styles behind.  In most cases I don't need them, and they just add to the megabytes I'm trying to send.

Skip Templates (checked): Just like the styles, I usually don't need to send them, and they usually take up space.

All set and ready to go!

• Now I finally hit the "Search" button.  Pack and Go will find the files associated to the assembly I chose.

The files that make up this assembly.

• Now, I want to make sure I get the drawings, and any presentations that this assembly uses.  That's where that second "Search" button comes in.  Notice it's "lit up" now?  This is the step where I click it!  

It will give me a list of which files it's found.  I can choose which to include.  Then include them by clicking the "Add Button".

• Now all that's left is to click "Start"!  The files will packed to the location I choose.  All I have to do is hit "Start" and the files are away!

The files are ready to go!

• Opening the destination location shows me the files I've sent out.  The Pack and Go tool will create a log summarizing the files sent.  It'll even create a new project file that can be used to organize the files on the "other side".  Now all that's left is to zip them and send them on their way! 

Ready for shipping!

But that's not the only way to use Pack and Go.  Another option is to find the file in Windows Explorer, right click and choose "Pack and Go" from the right click menu.  The same Pack and Go tools can be accessed from there!

Another way to Pack and Go.,

The last, is via Design Assistant, where a right click on will invoke the Pack and Go.  But it's so much easier to grab it from Inventor, or by right clicking in Windows Explorer, I can't recall the last time I used this approach.

But it's still valid nonetheless!

And to see the steps in a video form, take a look below!

A blog post delayed a few days

“Snowboarding is an activity that is very popular with people who do not feel that regular skiing is lethal enough.”
Dave Barry

Every once in a while, even I take a break. 

This weekend was one of those weekends where I did just that, as I took a weekend snowboarding holiday at Mammoth Mountain.

Because of that, this blog post gets pushed back a bit, as I recover from the weekend. 

I think you can see why it was a worth while break!

Looking down toward Lake Crawley.  The clouds have obscured the valley.

We got a little snow there.

Even the drive home is stunning!

 But look for some info in the next couple of days.  I still have a post planned!

Rotating Ordinate Dimension Text via Dimension Styles in Autodesk Inventor

“I should be soaring away with my head tilted slightly toward the gods, feeding on the caviar of Shakespeare. An actor must act.”

In the last couple of weeks, I've been asked the same question has come up.

How do I rotate my ordinate dimension text 90 degrees?

The next I need to rotate

It's a question that comes up every so often, goes away, then comes back. 

Looking back in my archives, I've realized I've never created a blog post for this one, so here it is.  How to rotate ordinate dimension text 90 degrees!

• First, choose the dimension style I want to edit, right click, and select "Edit Dimension Style".  I can also go to the Styles Manager on the Manage tab, but the right click method is a little quicker I think.

Editing the dimension style

• The Dimension Style Editor appears, selected the dimension style.  Click the "Text" tab.

The text tab, where to look

• This section contains the settings for text orientation.  Select the "Vertical Orientation Tab", and rotate the text to be vertical instead of the default, which is horizontal.  Save and close the Dimension Style Editor.

Changing the setting

And it's done!  One last step would be to save it to the styles library, and make sure it's available to all the drawings, if desired.

Saving to the Styles Library.

But that is it.  As I've said too many times before, 'Not hard, when you know where to look".  But indeed, it's just a matter of looking in the right place.

And naturally, there has to be a video that goes with it, so here it is!

Embedding vs. Lilnking images in Autodesk Inventor - The Poll's have Closed

“I'm not going to have opinions. I'm not going to cause problems. I'm going to go with the flow.”
Milton Bradley

A couple of weeks ago, I posted a blog on embedding images to title blocks in Autodesk Inventor, and stated that embedding is my personal preference.

That blog received comments from a few users who strongly favor linking images in, for a variety of reasons that are completely reasonable.   Those comments can be seen on the original post linked above.

I also got responses on my Twitter account from users who had equally strong opinions favoring embedding.

Inspired by this I tried my hand at creating a survey on embedding images into Autodesk Inventor's drawing resources, or linking them.  Just to see what the "interverse" would say.

 I left the survey open for about a week, and the results are in!

The responses to the survey weren't huge.  26 people in total responded to my poll.  Of those 26 responses, 23 favored embedding images, and 3 favored linking.

The results are in!

So from this small survey, what conclusions do I draw?  That is, other than 23 out of 26 people prefer embedding? 

While my inbox wasn't flooded with responses, I would say the results are consistent with my experience "in the field". 

I could also say that I've been validated, seeing how embedding is what I prefer to do on my personal files. 

Yay me. 

But in this respect, I'm no different that the average CAD jockey.  I'm just a user that's made choices based on my own, personal needs.

So validating my personal opinions isn't what I was after.  And for those of you who might be wondering, I did not cast a vote on this poll!

I've learned that there is a strong minority that does prefer linking.  Those who prefer that method have thought this out, and are also drawing conclusions based on their design needs.

So, to quote corporate America, "What's our takeaway?' 

Most users seem to favor embedding, but there is also a minority that strongly prefer linking images in. 

My ultimate, personal, conclusion?  Keep calm and carry on.

I'm perfectly happy embedding my images, and I'm sure most of the 23 who voted for embedding agree.

For those 3 who represent the "linkers"?  Link away!  If linking makes your jobs easier, then by all means, LINK!

It was never my intention to change any one's mind.  Only to find out what choices users are making, and share those results back out to the user community.

So thanks for those who took a few minutes out of their day to share there responses.  I appreciate the participation!  Maybe I'll try another poll on this later on.  Just to see how things have changed!

Thanks again everyone!

Copying a Drawing Sheet from One Drawing to Another in Autodesk Inventor

“Someday I hope to write a book where the royalties will pay for the copies I give away.”
Clarence Darrow

Last week, I put up a post describing the steps I use to copy a view from one sheet to another in Autodesk Inventor  But what if I want to copy a sheet from one drawing file, to another?

There are some simple steps for that process too.

For my example, I want to copy a drawing sheet of an assembly from one drawing to another.  In order to accomplish this, these are the steps I like to use.

1) Have both the drawing file including the source sheet and the destination drawing file open at the same time.  I like to cascade them so they're stacked on top of each other.

This is the setup I like

2) Right click on the sheet to be copied in the browser and choose the "Copy" command.

Right click on and choose "Copy"

3) Activate the destination drawing by left clicking on in the drawing.

Click to activate the next sheet

4) Right click on the destination drawing's name  in the browser, and choose "Paste".  Note that in the image below, the name (Drawing1.dwg) is highlighted blue.

Pasting in the new sheet

5) The sheet will appear in the new sheet.

The sheet is duplicated in the new drawing

It's as simple as that. 

For an added tip!, The drawing sheet can now be reordered by dragging and dropping inside the browser.  That makes sure it's exactly where you want it.

I have also, in my travels, found a couple of additional tricks to be aware of going forward.

1) Make sure to have the source and destination drawing files open at the same time.  Opening the source file, choosing "Copy", then closing the source file won't work.  The Paste option won't appear.

I don't know why this is.   But it's something to be aware of.

2) If you want to copy the entire drawing sheet from one view to another in the same drawing, open a template and copy to the new drawing first.  Then, copy it from the  new drawing back into  the original.

Trying to duplicate the sheet in the same drawing without using an intermediary file doesn't work.  The paste option won't show.

Again, I don't know why this is.  I just know that it is.

These are a few more tricks that I use when I need them.  And while I don't need them often, they've helped me quite a bit in the times that I have needed them. 

If you'd like to see a video where I show the steps I've used, just check out the video below!

A Friday Tip: Find and Replace in iLogic

“The squeaky wheel doesn't always get greased; it often gets replaced”
John Peers

Over many years I've spent staring bleary eyed typing at a computer screen, two of the skills I've gotten pretty good at are typing, and the copy and paste hot keys (those are CTRL+C & CTRL+V if you're not familiar).

But there are times that I've found this doesn't help me.  I use the methods I'm used to because they're comfortable.

That was what happened this morning, I was replacing a bunch of variables in iLogic and starting copying and pasting away.

Then it hit me.... Like a palm to the face it hit me!

There are Search and Replace tools in iLogic!

I've been copying and pasting a bunch of entries when I could have just used Search and Replace to get them all in one shot!

The real files I was working on are proprietary, so I can't show it here.  So standing in for the proprietary files is a woodworking jig that I'm driving with iLogic. 

It's a generic template I created for cutting shapes in boards.  It's designed to be copied with Autodesk Vault's copy design tool.  Then iLogic is used to change the dimensions of the base and positions of the handles, stop, and clamps to fit the board being cut.

The jig.  iLogic drives the dimensions and positions of the components

Here's an example of the code that's driving the jig.

'These parameters drive the Base Dimensions
Parameter("Cloudlift Fixture Base Test:1", "Width") = Base_Width
Parameter("Cloudlift Fixture Base Test:1", "Length") = Base_Length
Parameter("Cloudlift Fixture Base Test:1", "Length") = Base_Thickness



'These parameters drive the Spacing between handles.
Parameter("Cloudlift Fixture Base Test:1", "Handle_Spacing") = Handle_Spacing

What I really need to do is swap "Cloudlift Fixture Base Test:1"" with "Cloudlift Fixture Base dev:1", to reflect the change I made in a components name in the browser.

The component's new name in the browser

I could copy and paste this with very little trouble.  But in the file I was working with (the one I can't show), I had at least fifty entries that needed to be changed.

Now that isn't nearly as easy!


Fortunately, I realized that I could Search and Replace the data before my "Copy & Paste" habit got the best of me.

The dialog box below shows the Search and Replace tab ready to go.  I have the text I want to find, and the text I want to replace all setup.

Since I want to change all the appearances of "Cloudlift Fixture Base Test:1" in this rule, I chose the "Replace All in this Rule" option.

Boom!  That's it, I'm done!

Search and replace has done it's job!

So what did I learn? Or rather "relearn"? 

Don't get too comfortable.  Every once in a while I need to take a step back and see if there's a better way to do what I'm doing. 

I think if there's anything I'm grateful for this Friday, it's that I had my little epiphany before I started my "Copy and Paste" insanity.  It saved me a nice little chunk of time, and a whole lot of headache!

A User Poll! Do you embed, or Link Images in Your Autodesk Inventor Drawings?

“It's honesty. You may not agree with him, but you know where he stands.”
Rosemary Thompson

Back on January 2nd, I wrote a blog post regarding embedding versus linking images into Autodesk Inventor drawing resources, such as inserting a logo into a title block. 

Interestingly enough, I've had some fascinating comments from blog, my Twitter feed, even a personal conversation or two that seem to indicate that there are some strong opinions on both side of the fence.

It's plain to see in my post that I prefer embedding the images.  While I see some benefits to linking, they've never been enough to outweigh the headaches that I've encountered in dealing with them. 

But those who disagree with me aren't just shaking torches and pitchforks.  They've brought up solid reasons for their stance as well.

So I've decided to take this as an opportunity to try my first poll, and ask the world at large, what do you prefer?  I'm sure there will be some spirited opinions, and I interested to see what they'll be.

You'll find the survey below.  Bear with me for any failings, this is my first attempt and I'm sure there will be a mistake or two! I'll keep the poll open for a week, until January 15th, and we'll see what the results are!

Feel free to add your thoughts to the comments below, all I ask is that it be kept civil.  No flame wars, etc. 

Thank you all for your input!

Create your free online surveys with SurveyMonkey, the world's leading questionnaire tool.

Copying Drawing Views from One Sheet to Another

“Drawing is putting a line (a)round an idea.”
Henri Matisse

I know I've had to do this a few times back in my design days, and I know that others out in the "DrafterVerse" have faced this also.

How to copy drawing views from one sheet to another in Autodesk Inventor drawings?

I remember having cases where I needed to create a drawing view on a separate sheet that was almost the same as one on a previous sheet.  Perhaps I needed to change some notes, or possibly remove or add annotations.

In each one of these cases, the last thing I wanted to do was recreate the view and annotations all over again.

But there are ways that views and sheets can be copied with very little difficulty.

So how can a view be copied from one drawing sheet to another?

• I'll start out with a drawing that has the sheet I want to copy.  This happens to be a base plate for a wood routng jig. 

The sheet I need to copy

• Next, I create a new sheet in this drawing set.  This is the destination for the copy.

The new sheet ready for a copy

• Now that I have a destination sheet, I can switch to my source drawing.  I select the views I want to copy (use the "CTRL" key to select multiple views).  Right click and choose "Copy".

Copying the views from the source sheet. 

• With the views copied to the clipboard, I can paste them to the destination sheet by selecting the sheet's icon in the browser, right clicking, and choosing "Paste".   

Pasting the view

• The view will appear on the new sheet.  Now the annotations can be changed as needed!

The completed view.  Dimensions removed, and a detail added.

And here's a video to go along with the steps above!




In other Inventor Tales news!

I've finally decided to grab www.inventortales.com as a domain for this blog.   Don't worry, the old links with www.inventor-tales.blogspot.com still work, but now there's a shorter link that can be used to get to Inventor Tales! 

KETIV's Autodesk Manufacturing Academy Archives are Out for 2012

"I get by with a little help from my friends."
The Beatles

Back in October, KETIV held the Autodesk Manufacturing Academy in California and Oregon.  For those who were able to be there, all of us here at KETIV are grateful for your attendance, and hope you enjoyed it.



But if you weren't able to attend, the archives contain the documents and videos for the sessions at AMA. 

Here's a list of the sessions that KETIV and Autodesk presented at AMA.   You can find the information for each session by going to the AMA Session Arhives HERE!

1A - Sheet Metal Design with Autodesk Inventor
        See Inventor's sheet metal tools in action!

1B - Get Smart with Inventor Modeling
        Workflows for Autodesk Inventor and Inventor Fusion

1C - AutoCAD on AutoCAD Electrical Steroids
        See tools to help improve your AutoCAD Electrical Skills

1D - Automating Repetitive Design Tasks
        This was my session.  There are examples of iFeatures, iParts, iAssemblies, and
        iLogic.

2A - The Secret Life(cycles) of Vault
        Get a better understanding of how lifecycles work in Autodesk Vault

2B - Digital User Manuals & Documentation
        Creating user documentation, in it's many forms! 

2C - Product Lifecycle Management - Autodesk PLM360
        Want to know more about PLM360.  This is your stop.

2D - Vault Health Check
        Your Vault was running great three months ago.  Here's how to make sure it's running
         great three months from now!

3A - Vizualization Workflows with Product Design Suite
        See workflows with Product Design Suite, 3dsMax, and Autodesk Showcase

3B - Simulation360: Leveraging the Cloud
        Use the cloud to maximize to design more efficiently

3C - PCB Schematic and Layout Integration
       An overview of PCB and layout creation in Mentorgraphics

3D - Developing and Managing a Facility with Factory Design Suite and PLM 360
         Integration of Autodesk Factory Design Suite with Autodesk PLM 360

4C - The Business Side of Autodesk Software: Making the Most of Your Software Assets
        An overview to better understand how your Autodesk Software is licensed

For those that attended, I hope you had a great time and learned some cool things.  I hope to see you at the 2013 sessions.

For those who couldn't attend, I hope the session archives are something you can use in your daily workflows!

Inserting vs Embedding Images in Title Blocks in Autodesk Inventor

“Break one link and the whole chain falls apart”
Proverb

Now that the we've all survived the Mayan Apocalypse and are cruising through the first few days of 2013, here's a simple post to kick off the new year.

One thing I've had to do several times is import a logo into a the title block on a drawing.  The process is straight forward, and dare I say easy.  As a matter fact (insert squinty eyes), it's too easy.

The danger is that by default, the image is actually linked into the file.  Not embedded. 

Personally, I hate linking the image to the title block.  In my experience, it seems like the image gets lost, or there are multiple copies of the linked image floating around, inevitably causing what could be a minor data management nuisance to a full fledged headache!

Just imagine using Vault with Unique File Names Enforced, and being unable to check in a file because there's already a file named "logo.bmp"!

Needless to say, I always embed my logos.  I find it works a lot easier for me in the long run.


So in this post, I'll go over the steps to insert a logo into the title block, and the step that makes sure the logo is embedded instead of linked.

First, edit the definition of the title block by right clicking on it in the browser, and choosing "Edit Definition".

Editing the definition of the title block.

Now the Sketch Ribbon becomes active.  Click on the "Image" icon to insert an image.

Inserting the image

The next step is to draw a rectangle where the image will reside.  A dialog box will appear asking you to select the image to insert.

Inserting the image.  Tumblr Beasts courtesy of TheOatmeal

This is the point where it pays to stop and look at the dialog box.  Notice the "Link" checkbox?  It's checked by default!

The link box.  I uncheck this.

 If left checked, the image will link from it's current location.  That means the image must always be accessible by the file, and cannot be moved, deleted, etc.  This is why I've always preferred to embed the image. 

By unchecking the "Link" box, the image will now embed in the document, instead of linking.  Now it doesn't matter what happens to the original image.  The title block carries the image with it in the document from this point forward.

Image embedded

There are the steps to insert an image, with that vital stumbling block of the link checkbox.  Watch out for that step.  It's a doozy! 

And out of my curiosity, and that of everyone out in the 'Verse, is anyone out there prefer to link the image instead of embed it?   Throw out a comment below.  I'd love to see how you're making it work! 

If you agree with embedding the image.  Throw a comment too!  I'm a curious soul, and I always like to see who is doing what!

Happy 2013! Taking a weekend off!

Happy new years from Inventor Tales!  I'm taking the weekend off this time, but Inventor Tales will be back with new posts for 2013!

I'll see you all in 2013! 

Splitting Tables in Autodesk Inventor

“Let the gentle bush dig its root deep and spread upward to split the boulder.”
Carl Sandburg


As I'm waiting for 2013 to arrive, I came across a little tip in Autodesk Inventor that it could be said falls into the "I never noticed that" section. 

Splitting a hole table.

Once upon a time, when I was designing stamping dies, there were many a time that the hole table describing all the holes in a die plate would run off the page. 

Back at that time, I was using AutoCAD, so breaking was a matter of inserting and manually populating blocks.  

But what happens if the same thing needs to be done with Inventor?  Below is an example of a hole table I want to split.  I know the table isn't that long, and probably doesn't need to be split in this case, but bear with me, it's just an example!  Besides, I didn't feel like modeling a part that did run off the page!

A table in need of splitting

Let's say I want to split the table at the row 'C1'.  All I have to do is right click inside one of the fields, and choose "Table>Split Table".

Splitting the table.  Make sure to click inside one of the fields

After choosing the "Split Table" option, the table will split at that cell.  Click and drag on the tables to reposition them.  The hole table can then be split again, and again, as needed!

Repositioning the newly split table.

That's all there is to it!  But there's a couple of other tips worth knowing. 

1) If the table needs to be "recombined", right click on the table, and choose Table>Un-Split Table

Combining a "un-splitting" a split table.

 
2) This is very important!  Don't click on the border of the cell! The "Split Table" option will gray out if the border of the cell is clicked on!

This is what happens when clicking on the border of a cell!

So that is today's short little tip.  A few tricks that I hope are helpful. 

Have a few thoughts you want to share?  Feel free to drop a comment or two!

A Holiday with Autodesk Force Effect Motion

"Never mistake motion for action.”
Ernest Hemingway

As the holidays approached, I found myself finally taking a look at something I had told myself to look at, and "never got around to it". 

It was Autodesk's Force Effect Motion.

If you're not familiar with Force Effect Motion, it's a mobile app that works on Apple and Android devices, and allows for the laying out of mechanical mechanisms on a mobile device, instead of using paper and pencil, or even firing up a CAD package like Autodesk Inventor or AutoCAD.

A Force Effect Motion diagram - Courtesy of the Autodesk Force Effect Facebook Page.

 
So to satisfy my geeky curiosity, I imported two images to try out as backgrounds.  The first was a picture of the landing gear for a Douglas DC-3, the second, the extended and retracted positions for a Boeing B-17 Flying Fortress. 

I had a lot of fun playing with these two mechanisms.  It allowed me to sit on my couch, and analyze the landing gear mechanisms and better understand how they worked!

I can see how using this application can help get a mechanism conceptualized before firing up a CAD application and creating models that may have to be thrown away because part way through the process, it's realized that I've gone down the wrong design road. 

It's like creating a napkin sketch, but with the added benefits of being able to modify the diagram, and avoid getting food on your engineering designs! 

In conclusion, I have to say I wish I had tried this app out sooner, but now that I have, I'm glad I did.  The next time I'm at Planes of Fame, I'll definitely be getting  a few more pictures of landing gear mechanisms to try out! 



So here are a few videos.  First, a video from the AutodeskMFG YouTube channel, showing how to use Force Effect Motion.
\

And next, the videos I created, showing the DC-3 and B-17 landing gear mechanisms.  \

Happy Holidays from Inventor Tales.

“A good holiday is one spent among people whose notions of time are vaguer than yours.”
John B. Priestly


It's Christmas Eve today, so I'm taking a break from a post this week.

This weekend has been a wonderful snowboarding holiday with friends in Mammoth, followed by Christmas with the family. 

A gorgeous view off of Chair 5 at Mammoth

So it's time for a few days off of tech stuff. 

Happy Holidays to everyone out there!  Enjoy your Holiday!

~Jon Landeros

Matching Colors in Autodesk Showcase

“Don't miss all the beautiful colors of the rainbow looking for that pot of gold.”
Unknown

If you want to know how important getting the proper color of a logo can be.  Get it wrong and see how quickly the Marketing Department comes looking for you.

The truth is it can be very important.  For things such as color schemes and logos, it can be critical.  Company "red" is not just "red".  It's a specific red, or blue, or yellow.

The KETIV logo.  It's not just "red".  It's got a specific RGB value.

When working in Autodesk Showcase, there have been a few times where I've needed to use a specific color.  And if it really is that important, I'll ask for the RGB (Red, Green, Blue) values of the color.

Many times, the Marketing Department has those values, and can provide them for you. 

But I recently I ran into a case where I needed to match the color of a logo as closely as possible, and and I didn't have the RGB values to work with.  So what did I do?

I could have played with the color until I matched it by eye, but that can be time consuming to do, and I wanted to get as close as I could, as quickly as I could.

Fortunately, when editing a color, showcase has an "eye dropper" icon that lets you select and existing object, and "paint" it with that color.

Edit the color by right clicking on it, and choose the eyedropper

I was able to use it to select the object I needed to match the logo with the eyedropper, and "paint" the object with that color.  It worked like  a charm! 

Of course this isn't as accurate as having the RGB values.  But when I couldn't get the RGB values, this was more than adequate to get me what I needed!  It also saved me a huge amount of time because now I didn't have to finesse the color into play.

So for that, Here's a quick video on how I used this nice little trick

A Couple of Success (and Hopefully Inspirational) Videos

“Have great hopes and dare to go all out for them. Have great dreams and dare to live them. Have tremendous expectations and believe in them.”
Norman Vincent Peale

Technology marches a long at a staggering pace.  As a matter of fact, I'm not even sure it's marching.  It's sprinting like a jackrabbit hopped up on Red Bull.  

Is it stressful?  Sure!  Trying to keep up with all this change isn't easy. 

Is it difficult?  It can be.  Knowing what to implement is as tricky as knowing what's available to you!

But is it amazing to see how technology is changing things?  Yes it is!  It's exciting to see the evolution, and even revolution, in technology.

To that end, I'm sharing a some videos that I hope offer some inspiration.

The first is from the General Session at Autodesk University 2012, where the CEO of Autodesk, Carl Bass talks about "What if?"  and how technology, particularly Autodesk technology, is fueling the answers to that question. (Thank you CADRelations for the video)



And to show a company that came up with creative answers to "What if?"  Here's a story on GK Machine is using Autodesk products to improve their products and processes.



But how about this story of using technology to answer the "What if?" question, as cool as it would be to say it is.  The video and story are worth checking out.  It's about a group of five high school kids built a flight simulator for a Colonial Viper from Battlestar Galactica!  Autodesk Inventor played it's part as the tool that enabled it, but imagine where these kids are going with technology!

First.  Here's the Gizmodo story on how they got started! 

 But they followed through with it, and got it done!

Here's the completed nearly product and accompanying story from Gizmodo!

***Edit 11-Dec-2011***

I found the link to the "The Viper" Webpage!.  Check out their team site here!

***End edit****

How cool is that!