Keep Your Finger on the Trigger - iLogic and Event Triggers

“Next in importance to having a good aim is to recognize when to pull the trigger.”
David Letterman

Just a short post for today.  I spent the holiday snowboarding in Mammoth, so I only had limited internet access for a few days.  But for views like this, I'll give up a bit of web access.

And the time off was great!

The view from town is pretty nice.

Who wouldn't want to have a morning like this.

For today, I wanted to expand upon last week's post and talk about Event Triggers in iLogic.  In that post, I talked about creating a rule to choose my sheet size, border, and title block by choosing them from a dialog box created in iLogic.

This rule could be fired by clicking the iTrigger icon on the 'Manage' Tab in the drawing.

The dialog box created in iLogic

But what if you want a rule to fire automatically, under a specific condition? 

That's where an Event Trigger can come into play. 

By clicking on the Event Trigger icon, you can specify the condition under which a rule fires without you explicitly asking it to. 

1) Click Event Trigger from the 'Manage Tab'.

Access the Event Trigger

 2) Right click to edit an event.

Right click to add or remove the rules attached to an event

 3) Choose the rule (or rules to attach to the desired event)

Edit your rule

One you do that, you can now fire the rule when you want it to.  For example, when I start this file from a template, the option to choose my sheet size, border, and template fires up automatically!

Drawing Conclusions on Formatting a Drawing with iLogic

“Information is a source of learning. But unless it is organized, processed, and available to the right people in a format for decision making, it is a burden, not a benefit.”
William Pollard

***Edit 4-April-2012***

I've added the file I used in this blog post to the GrabCAD website if you want to download it and take a look.  You do have to be a member, but I think you'll find that it's a great site with a lot of free CAD models. 

***

As I was wrapping up my videos for the Autodesk Manufacturing Academy, I found a video that had slipped through the cracks.  I had recorded it, but I hadn't produced it.  So I finished it up and added it for this weeks post.

This video discusses how to change drawing formats with iLogic.

The finished rule asking you for the format you want to use

One more note before you look at the code below!  If you use event triggers, you can fire the rule automatically.  For example, the image below sets the drawing to fire it's rule when I start a new drawing.  If you set this from a template, the drawing will ask you which drawing format you want when you start it!

Use event triggers to fire a rule when a particular event happens. This one occurs when you start a new file

So without further delay, here's the video!

Here is the full code for this particular rule.  Once you get the first couple of rows down, it's a matter of copying, pasting, and changing options to get the others.

'Fires Rules when iTrigger icon is clicked

trigger = iTrigger0

'Creates a dialog box asking us which format we want

Format_Select= InputListBox("Select Format Type", MultiValue.List("Border_Type"), Border_Type, Title := "Drawing Format Selection", ListName := "List")

'Sets sheet size, title block, and border for A size

If Format_Select = "A Border" Then

ActiveSheet.ChangeSize("A", MoveBorderItems := True)

ActiveSheet.TitleBlock = "Small Border Title Block"

ActiveSheet.Border = "A-Border"

'Sets sheet size, title block, and border for B size Sheet 1

ElseIf Format_Select = "B Border Page 1" Then

ActiveSheet.ChangeSize("B", MoveBorderItems := True)

ActiveSheet.TitleBlock = "Large Format Page 1"

ActiveSheet.Border = "B thru F Border"

'Sets sheet size, title block, and border for B size Sheet 2+

ElseIf Format_Select = "B Border Page 2+" Then

ActiveSheet.ChangeSize("B", MoveBorderItems := True)

ActiveSheet.TitleBlock = "Large Format Page 2"

ActiveSheet.Border = "B thru F Border"

'Sets sheet size, title block, and border for C size Sheet 1+

ElseIf Format_Select = "C Border Page 1" Then

ActiveSheet.ChangeSize("C", MoveBorderItems := True)

ActiveSheet.TitleBlock = "Large Format Page 1"

ActiveSheet.Border = "B thru F Border"

'Sets sheet size, title block, and border for C size Sheet 2+

ElseIf Format_Select = "C Border Page 2+" Then

ActiveSheet.ChangeSize("C", MoveBorderItems := True)

ActiveSheet.TitleBlock = "Large Format Page 2"

ActiveSheet.Border = "B thru F Border"

'Sets sheet size, title block, and border for D size Sheet 1

ElseIf Format_Select = "D Border Page 1" Then

ActiveSheet.ChangeSize("D", MoveBorderItems := True)

ActiveSheet.TitleBlock = "Large Format Page 1"

ActiveSheet.Border = "B thru F Border"

'Sets sheet size, title block, and border for D size Sheet 2+

ElseIf Format_Select = "D Border Page 2+" Then

ActiveSheet.ChangeSize("D", MoveBorderItems := True)

ActiveSheet.TitleBlock = "Large Format Page 2"

ActiveSheet.Border = "B thru F Border"

'Sets sheet size, title block, and border for E size Sheet 1

ElseIf Format_Select = "E Border Page 1" Then

ActiveSheet.ChangeSize("E", MoveBorderItems := True)

ActiveSheet.TitleBlock = "Large Format Page 1"

ActiveSheet.Border = "B thru F Border"

'Sets sheet size, title block, and border for E size Sheet 2+

ElseIf Format_Select = "E Border Page 2+" Then

ActiveSheet.ChangeSize("E", MoveBorderItems := True)

ActiveSheet.TitleBlock = "Large Format Page 2"

ActiveSheet.Border = "B thru F Border"

'Sets sheet size, title block, and border for F size Sheet 1

ElseIf Format_Select = "F Border Page 1" Then

ActiveSheet.ChangeSize("F", MoveBorderItems := True)

ActiveSheet.TitleBlock = "Large Format Page 1"

ActiveSheet.Border = "B thru F Border"

''Sets sheet size, title block, and border for F size Sheet 2+

ElseIf Format_Select = "F Border Page 2+" Then

ActiveSheet.ChangeSize("F", MoveBorderItems := True)

ActiveSheet.TitleBlock = "Large Format Page 2"

ActiveSheet.Border = "B thru F Border"

End If

Oh Wait, Maybe We Do Need Those Stinkin' Passwords After All

"My intention was never to disrupt security. The fact that I logged on when there was no password meant that there was no security to begin with."
Gary McKinnon

Today's blog contains a video created by KETIV Technologies own Mike Carlson.  I provide the narration, but this time, I'm only giving a voice to his expertise.

We've all had it happen.  A password is forgotten, or a user parts ways with the company, taking their password with them into the wilds of the outside world.

So how do you access that account when the password has been lost to the ages?  The video created by Mike shows you how.

Before we get started, make sure you're logged in as the Administrator (or have the Administrator logged in), since changing the password to another account is an Administrator privilege! 

It's good to be king, isn't it?

Just a Tip or Two - A Short Blog

“Of all the things which wisdom acquires to produce the blessedness of the complete life far the greatest is the possession of Friendship.”
Epicurus

Today I had a hectic weekend, including attending my Uncle's 80th birthday.  To say the least, a worthy cause to skip blogging.  So tonight's blog is pushed back a little later in the week, but it is coming! 

Until then, here's three tips that I've uploaded to my Twitter account over the last few weeks!

Tip 1:  When working in a model (*.ipt) file in Inventor 2011, click where indicated to change the dimension display.  Inventor 2011 even lets you choose fractions!

Get fractions too!

 Tip 2: In an Inventor 2011 drawing, use 'Change Model Reference' to make your model reference a different drawing

Change the model reference here!

Tip 3: Do you want a work plane, work axis, or work point to remain in the command (so you can place more of the same), instead of cancelling after you place the first work feature?  While in the command, right click, and choose 'repeat command'.

Right click while in your work feature command and check 'repeat command;

That's it for now.  But I should be able to get something up by Wednesday!

Happy Inventing!

What's Old is New Again - Using AutoCAD Blocks Inside Your Inventor DWG

“Every block of stone has a statue inside it and it is the task of the sculptor to discover it”
Michelangelo

Recently, I found that I wanted to use some data in my Inventor drawings.  The problem was, that the only resource I had available to me was a group of AutoCAD blocks.

Boym, wouldn't it be nice if I could reuse these?  :-)

Fortunately after Inventor 2010, we can reuse AutoCAD blocks inside of Inventor.  On the Annotate Tab, you can choose "Import AutoCAD Block" to reuse your AutoCAD blocks.

Insert Blocks from the Annotation Ribbon

Choose the block you want

Serve and Enjoy!  :-)

And of course, here's the video on how to do it. 

Finally, a couple of notes.

There is one thing to be aware of.  The blocks only work in the Inventor *.dwg file, not in the *.idw file.  It;s the only place I can think of where I've ever noticed a difference between the two files.

I'm not sure if the exact whys of this one, but it would be remiss of me not to mention it.

Also, I would be equally remiss not to thank Woodworkers Woodshop.  I located these profiles here, and converted them into AutoCAD blocks that I can reuse.  So if you're in the market for wood working info, swing by there site!

Exporting a Sheet Metal Flat Pattern with Autodesk Inventor

“Many attempts to communicate are nullified by saying too much.”
Robert Greenleaf

Here's what we're going to export

 Every once in a while the export of sheet metal flat patterns comes up, and how best to export the flat pattern.

One way I really like is directly exporting from the part file, primarily because it gives you several options to adjust how your file is exported.  One often overlooked method is to save the settings in an *.ini file.

Here's a video showing how you can export to a *.dxf from the Inventor part file.   And don't forget to make sure those unfold rules are set up correctly!

Video & Screen Capture created using Snagit & Camtasia by Techsmith
SpacePilot Pro by 3DConnexion used to navigate model

Happy Halloween!

“I think a lot more people are getting into Halloween because it's the one time of year where adults can be kids.”

Craig McDonald

 

Once again this weeks post is a little delayed.   I spent this weekend amongst friends enjoying the Halloween weekend, and in that time, I didn't get a chance to work on a blog post. 

 

So once again, this week we'll be a little late.   Look for a post a little later this week!

Until then, Happy Halloween!

This is Your Section. Controlling Sectioning in Inventor Drawings.

“Divide your movements into easy-to-do sections. If you fail, divide again.”
Peter Nivio Zarlenga quotes

While on working off site on an assignment, I encountered more section views than I'd seen in a long time.

We all know that there's going to be components that won't be sectioned.  But Inventor doesn't necessarily know which components we want to participate in the section view.

Not what we want, the plunger and shaft shouldn't be sectioned

 So how to we tell Inventor that it shouldn't be sectioned?

This is what we want!

Here's a video on how to control which parts are sectioned in the drawing.  Happy Inventing!

Monday Post Delayed

“Procrastination is the art of keeping up with yesterday.”
Don Marquis

I've been pretty consistent about putting up a post Monday, but this Monday is an exception.  I was lucky enough to take a quick camping trip this weekend to Joshua Tree.  But that prevented me from getting a post ready for my Monday deadline.

But never fear, I should have one by tomorrow, and then, back to the usual schedule!

Until then, here's a couple of pictures from the trip!

A tree trying to grow along one of the hikes

The road near camp

The view near the camp site

My loyal steed near the hike we took.

Dimension Display - See Dimensions in a Different Way.

“There is always a better way.”
Thomas Alva Edison

Now that Autodesk Manufacturing Academy  has at last drawn to a close, it's time to play catch up.

This week, it's a quick video on dimension display in the sketch environment.

If you've used Inventor for a while, you likely know that you can create equations that display your design intent.  But what you might not know is that you can change how your dimensions are displayed on the screen.

Right click to see the options!

There's a nice little tool called dimension display for that.  It's a tool that's like an old dependable car.  It isn't flashy, but it always comes through when you need it.

So without further adieu, here's the video!



Happy Inventing!

Naming Parameters in Autodesk Inventor

"You're never ready, you just run out of time."

With the Autodesk Manufacturing Academy looming close, these weeks blog is going to be quick and simple.

Many of us know that you can (and in some cases should), rename parameters inside of Autodesk Inventor. This makes the parameters easy to call back at a later time.  For example, it's much easier ot find a parameter named 'Length' opposed to trying to remember what parameter 'd89' represents.

Typically, you rename your parameters in the parameter screen of Inventor. 

A parameter renamed

But there is a quick way to rename them as your typing the parameter.  Just type "parameter = dx' when creating a dimension, and the parameter will rename at the time you're placing the dimension.

Renaming the Parameter

This renames the parameter all at once!  You don't need to go and open the parameters screen!

Verifying the renaming of the parameter

That's it!  A simple tip, but one I think is helpful!

More to come when AMA is done!

Creating a Cooling Grill in Inventor Sheet Metal - By Using Plastics Tools

“The wise adapt themselves to circumstances, as water moulds itself to the pitcher” 
 Chinese Proverb

Inspiration comes from unique directions at times.  I've been offsite working with a lot of electronic encolsures, which has been a fantastic experience for me.  But that's a story for another day.

While speaking with one of our techs, Mike Carlson about the project, the subject of cooling grills came up.

An example of a fairly typical cooling grill

Try using the grill from the Plastics tool set, he suggests.

I pause for a second.  I think there was a visible light bulb over my head.  My wheels spin for a second at at my first instinct, which is to blurt out, "That's a plastics tool, you can't use that in sheet metal!"

But my brain processes the information.  It can't find a flaw in that plan.  Instead my answer is "Bloody hell, that will work!"

I try it at my first opportunity.  Sure enough.  It works great.

So here it is!  Thank Mike Carlson for the inspiration.  I can't take the credit.

How to create a cooling grill in Inventor's sheet metal environment.... using plastics.

Inventor Customization - Using iLogic to Raise a Yellow Flag

“Time is the cruelest teacher; first she gives the test, then teaches the lesson.”
Proverb

With KETIV's Autodesk Manufacturing Academy getting nearer and nearer, I've been working heavily on my iLogic class.  As a result, this post is about, what else?  iLogic.

As I worked on developing my iLogic exercises, I found one place that would have been helpful in a past job working with electronic enclosures. 

I did a lot of work with Electronic enclosures that had to meet NEMA enclosure ratings.  We regularly used Hoffman boxes.  I downloaded this file from their website HERE.

Ahh, The Hoffman enclosure.  I know thee well.

If you want to read about the ratings, feel free to follow the link, it's good information.  For the purposes of this post, let's just deal with indoor, and outdoor applications.

I dealt regular dealt with outdoor (more robust, but expensive) and indoor (less robust, but less expensive) enclosures.  Needless to say, you didn't want to mix them up. 

An outdoor rated enclosure in an indoor application is overkill.  It costs too much, and the gains in exposure resistance aren't beneficial.

On the other hand, you don't want to use an indoor rated enclosure in an outdoor application.  The box isn't designed to meet those requirements, and moisture is likely to get inside the box and damage the components the box is intended to protect.

Back when i was in this line of work, you had to check the box part number and be sure.  while this wasn't difficult, it was sometimes a painstaking step, and there were times that mistakes happened.

Fortunately, one of these mistakes never made it beyond the computer, but it did result in lost time as the wrong box was removed from the model, the correct box (which may not have been the same exact size) was placed in, and the components placed in the box again.

So how does iLogic help?  With one, simple line of code, I can create a warning that will tell me the rating for this enclosure.  So I know right away if this is an outdoor rated enclosure, or an indoor rated enclosure.



Yes it's simple, but it can also be effective.  And sometimes little extra warning is all the help we need.

It's Automagic! The Drawing Resource Transfer Wizard

“He's got tools. Something to see.”
 Sid Monge

Necessity is often the mother of invention, and last week proved no different.

I was creating a large number of drawings for someone, and we were faced with something that, while easy, can be exceedingly tedious.

We needed to update title blocks in several drawings.  There were only about ten or twelve, but copying and pasting each one can be time consuming.

So instead, I used a tool to help automate the process; the Drawing Resource Transfer Wizard.  It can be found from Windows Start>All Programs>Autodesk>Autodesk Inventor (version)>Tools

The Drawing Resource Transfer Wizard

So how does it work?  Let's roll some footage and take a look!



This tool really helped me transfer the title blocks quickly, without having to do a bunch of copying and pasting from drawing to drawing. 

One thing to watch out for.   While the Drawing Resource Transfer Wizard will try to match up all the properties in the new resources, but it may not be able to do it in every case.  In other words, it pays to double check when everything is done.

In my case, I had to open the drawings to create final prints, so I checked the title blocks along with he dimensions, views, text, etc. that I had to check anyway.

In the end, this tool saved me the trouble of having to do a lot of tedious work, and let me focus on more important (and fun) things.

Happy Inventing!

Change Model Reference - Making the Switch

 “There are no answers, only cross references”
 Proverb

Every release of Inventor brings many new features.  So many, in fact, that some useful features can get easily overlooked. 

To this end, I've decided to revisit one of those, 'subtle but significant' features; Replace Model Reference. 

Change the Model Reference

This particular feature is actually available from the 'Subscription Advantage Pack' for Inventor 2010.  If you're on subscription, those files are available from the Autodesk Subscription site.  It was made available to everyone with the release of Inventor 2011.

What does this tool do?  It lets you change the model an Inventor drawing is using to generate it's view.

Why would I use it?  If you've ever tried to parts, assemblies, and drawings, in Inventor, you've seen that the drawing you've just copied wants to reference the original part or assembly. 

The old trick was to rename the original files, and force the drawing to ask you for it's reference file.  You'd point it to the new copies, and you'd be off and running (after renaming the originals again, of course).

Effective, but a little inelegant.

But by clicking the Change Model Reference button, you can open up a screen that allows you to select the current reference, and then browse to redirect it.

Choose view, and browse to new reference

Clicking the browse button, you can select a new model.

Choose your new file

Once that's done, the new file will replace the current one.

There it is.  The new reference!

Bear in mind, while Inventor will try to keep the dimensions it can, but it may not.  It all depends on how different the view is.  If it's totally different, all best are off.  But, if you've just created a copy, it's pretty solid.

So there it is.  Give it a whirl.  It's a great help!

Happy Inventing

Obeying the Rules - Enforcing Length using iLogic

“Hopefully my experience can help a little bit. I'm just a small piece of the puzzle.”

 Ed Jovanovski

One simple, but effective case I've see for iLogic is to prevent someone from inadvertently call out a length longer than what can be purchased, or manufactured by the tooling in the shop.  If caught too late, the ramifications of calling out the 'unobtainable' length can cause a lot of rework as the design is corrected.

Fortunately, a few lines of code in iLogic can help with that.

In this video, I describe how iLogic can be used to limit the length of a sample extrusion to 60 inches or less.



There's tons of things that can be done with iLogic.  This is just a small example.  I hope to post more as I go!

P.S. Here is the code that I used to create the rule.  My comments are below each line of code

iLogicVb.UpdateWhenDone = True
'updates part after rule finishes running

If Length > 60 in Then
'The if statement telling iLogic that something is to be done if the parameter 'Length' is longer than 60in

MessageBox.Show("Length cannot be longer than 5ft", "Design Violation")
'Displays a message box stating that the length can't be longer than 5ft

Length = 60 in
'Resets the length back to 60 inches

End If
 'Ends the if statement.

Maintenance Time! Autodesk Inventor 2011 SP1

Flying isn't dangerous. Crashing is what's dangerous. 
Aviation Proverb

It's out!  Last Friday, Autodesk issued Inventor Service Pack 1.  Fixing those inevitable little 'random features'.

I installed it last Friday on my Windows 7 64 bit box, and things are humming along normally.

So go ahead and give it a download from the link HERE!

Happy Inventing.