How Do You Like Your Part List? Filtered, or Unfiltered?

Things have been busy lately. There are days that I feel like I should put that in the fine print. But then again, I don't have any fine print. :-)

This time, I thought I'd mention something that's new to Inventor 2009, but may still not have received the fame it deserves.

Parts list filters.

The part list filters (like their name implies) filters the items visible in the parts list by the following criteria:

• Assembly View Representation (Design views for those of us who remember that far)
  
• Ballooned Items Only
  
• Item Number Range
  
• Purchased Items (Designated in the Assembly BOM)
  
• Standard Content (i.e. Content Center Components)
  

For this example, I'm going to use the 'Ballooned Items Only' option.

At the start, I have the parts list placed on our sheet. I've ballooned the parts I want to show on this view and placed my parts list.

But the parts list shows all the components in this assembly, and while this may be desirable in some circumstances. This isn't one of those cases.

In order to rectify this efficiently, I'm going to right click on my parts list, and choose the 'Edit Parts List' option.

Once in the parts list, choose the Filter Settings button.

The Filters Settings dialog box pops up, and now you can choose your options, and set your filter. Click the green check to commit it, or the red 'X' to remove it (in case you make a mistake). For this case, I'm choosing Ballooned Items.

Once the options are selected, choose OK and close the box down.

While still in the part list editor, you can already see the effect of the filter.

Hit OK again, and the parts list will update to reflect the filters you've created. That's it!

P.S. if you add a new balloon, the part list will update automatically to add the item you've ballooned.

In other news. The first announcements for what's new in the Autodesk Manufacturing Solutions has arrived. Click here to check it out!

Happy Inventing!

All right, Mr. DeMille, I'm ready for my close-up.

When we last left our Showcase hero (that's me, BTW) on February 3^rd, we had imported our clamp into a scene, but had yet to do much else to it.

In this blog, we're going to create an environment that's going ad a bit more of the realism we're looking for.

So with our clamp brought into Showcase, the first step to get away from that default blue screen is to go to our Scene>Environment Pulldown.

Once we select Environments, the tree with our available environments will appear.

Next, we left click on the environment we want, and add it to our scene. It will move from our environment library (the lower row) to our environments in scene (top row). It won't appear yet, however.

Now we can click on the Environment in the scene. It now becomes active, and we see that our part is now sitting on a wood floor, sort of. Our part is 'buried' in the floor, and we have to make one last adjustment.

To resolve this, go to the Scene pulldown again, and choose 'Set Floor Position'.

With this option open, now you can move the slider up and down to adjust the position of the part on the scene. You can also use the 'Move to Bottom of Model' option. This may not work every time (it does depend on the origin on which the model was originally built at), but it can position the model quickly.

With the positioning completed (by one method or another), you can return to the Scene>Environment option and turn off your environment menu to complete the scene.

Add a few more some shadows, and you're heading down the road of a Showcase scene.

I've also embedded a video of changing between scenes. I'm slowly getting better at this Youtube thing, but I still have a way to go. Thanks for being patient!

More to come later! It's getting late and I need to sleep sometime!

Video Killed the Radio Star...

If you know where that title comes from, you're dating yourself (right along with me, by the way).

But it seemed appropriate given the fact that I've officially published my first Youtube video. It's a preview of some of the new Rules Based Design Technology that's being shown in Inventor.

The video's not as nice as I'd like it to be, but it's my first go of it after all. I'm hoping to do a couple of more, and get them better!

Win, Place, and Show(case)

This is the ongoing story of a mechanical brain slowly making his adventures in the more artistic world of Showcase.

At long last, my engineer's mind has past the point of 'plastic deformation'. You designers and engineers know what I mean. My mind is being stretched past the point where it will no longer snap back to its original limits.

So with the philosophy out of the way, I've been working (at least as much as time will allow), with bringing my Inventor files into Showcase.

As I mentioned in the last blog, the process starts with a 3D model (In my case, it was Inventor, but could be another CAD program).

The first step is to import the model into Showcase using one of the detail options.

Trying to keep things short, here are the steps involved

1. Go to File>Import Models

2. Select your file, and open it. You'll be asked to choose the level of detail that you intend to use.

This isn't the same as the Level of Detail in Inventor (which unloads components from memory). This controls the tessellation (how many facets) the solid uses. The lower the detail, the 'blockier' the solids look. However, they load faster. The higher the detail, the better they look, however, they will load more slowly.





Once you choose your Level of Detail, you can bring in the components by hitting OK. You'll see the import progress screen come up.



3. This completes the import. You're now ready to start applying environments, materials, transforms, and shadows.


Ultimately, you can end up with this:



I'm going to add more to this in further blogs, but in the upcoming weeks, expect to see,

• Putting the model in an environment
• Choosing materials
• Using transforms to orient the model
• Creating ambient shadows

On a final note, both myself, and my esteemed colleagues at KETIV (Nicole, Mike, Javier, and Jonathan C.) are holding web events in February and March on the following subjects, all at no charge. Please feel free to swing by and take a look. We'd love to see you there.

• iDesign: Intelligent, Features, Parts, and Assemblies (Inventor)

• Get More From Your Autodesk Subscription (All disciplines)

• Building Custom Componenets - AutoCAD Electrical

• Large Assembly Management (Inventor)

• AutoCAD Customization (AutoCAD)

• Showcase Your 3D Designs (Showcase)

• InventorCAM: Powerful CAM Functionality (InventorCAM)

• The Missing Link - File Projects in Inventor

• Sheet Set Manager (AutoCAD)

• Unleash the Spreadsheets (AutoCAD Electrical)

You can register here

Happy Inventing! Or perhaps it should be 'showing' in this 'case' (get it? 'Showing' 'Case' = Showcase).

Bad puns aside, good weekend to everyone!

Never use the default password.

I'm in the middle of putting a new Showcase blog together, but I've been pretty busy, so it's not quite ready.

In the meantime, he's a little bit of a PSA (Public Service Announcement), on why you should probably change your default password on, well, just about anything.

This is an actual article off of Foxnews, right here.

So the next time you think of letting the default password slide, think of Austin, Texas.

As for that Showcase post, look for it toward the end of the week!

Making What Works Look Good Too (Autodesk Showcase)

One of my new adventures in 2009 is Autodesk Showcase, and while a grip of fun, has been challenging too.

First of all, what is Showcase anyway, and what does it do?

Showcase is a rendering tool that allows you to take 3D CAD models (even non-Inventor models!) and not only create photo-realistic renderings of them, but will also give you the ability to change colors, camera angles, and visibility in real time. You can literally see what your design is going to look like before it's even left your computer.

So what is the challenge for me?

I'm a mechanical engineer by degree. By definition that makes me the guy who things in a Cartesian coordinate system of X.Y.Z, with a tolerance of plus or minus .005.

Now for the Showcase world, where you hear things like 'that looks better if you move it a smidge'.

What the heck is a 'smidge' anyway? Is that some sort of constant that wasn't in my Dynamic Systems Analysis Course? I don't remember that one!

After deciding a smidge was smaller than a 'nudge' and bigger than a 'little bit', I carried on.

Things are a bit more subjective in the Showcase world, but once I shelved my '+/- .005
brain, I began to see what was possible.

I would have loved to have had this back in the days when I was designing enclosure hardware. It would have saved us days in presentations and trying to make SLA prototypes look real. Not to mention the catalog work we could have gotten done without having to build prototypes for photoshoots!

But the past is the past.

And this is the grips of fun part... making something that works... look good too.

There's a lot that can be talked about in Showcase, so I'll keep the basic steps concise. I thought that before I went in and started talking about 'tips and tricks', I'd just show the basic steps to get from CAD model, to rendering As I 'blog' on, I'll get into more depth in the steps and show you some of the things I get to work on!

First, you import your model


Next, get your model oriented.


Next, apply your materials and insert it into a scene.



With a scene and materials done, you can now calculate the ambient shadows. Once the materials and scene are in, you now have a rendering that you can rotate, modify etc!

True enough, there are subtleties, nuances, and tricks that you can use to make things look even better. It's also true that this is a pretty condensed process described here, but I'll add more soon. I promise!

Happy Friday everyone!

Editing your Dimension Styles Faster!

So, here it is 2009, and I'm still wondering where 2008 went. It seems I was snowboarding in Mammoth only six months ago, now I'm planning the next trip!

Here's a tip I ran across that I sometimes forget myself.

Working with dimension styles can be a little tedious at times. But there's one little thing that has definitely made it a little easier.

Most of us who've been using Inventor for a while know the standard method to editing dimension styles.

That is go to the Format>Styles and Standards pulldown menu, locate the dimension style, and either modify it, or use it to create a new one.


Of course, that brings up the Styles and Standards Editor. While powerful, this can be a pretty intimidating to identify and change the correct dimension style.



Thankfully, there's a way to get to the correct dimension style with a little less headache.

Just choose a dimension that you want to modify or copy, and right click on it.

By choosing 'Edit Dimension Style' you can modify the existing dimension style, changing all the dimensions it affects.



By choosing 'New Dimension Style' you can copy an existing dimension style and alter the copy to create more dimension styles.


These have the advantages of dropping you right into the correct dimension style when you're editing. In the case of creating a new dimension style, you can choose an existing dimension style that most closely suits your desire, and use the 'New Dimension Style' to make a copy you can modify.

Happy 2009 everyone! I hope this proves to be another helpful tip.

Taking Note of Inventor

Well, it looks like we've reached the last post of the year. So while reflecting back on 2008, I also started thinking about the 'Ghost of Inventor Releases Past'.

My memory fell upon a tool that I haven't used in a while, although it definitely has some benefits.

The Engineer's Notebook.

In essence, it's just a 'sticky note' inside your Inventor files, and while you can live a long, prosperous life without using the tool, it can be one of those helpful things that just might be useful in the right situation.

How to use it:

When you're in an Inventor assembly or part file, right click on the name of the file, and choose 'Create Note'.

Once you choose 'Create Note', the Engineer's Notebook will appear.



Now you can add the information you need to put in the note. In this case, I've added a note stating which model clamp we use, and that we usually have a lot of them on hand.




Now I can close the window by hitting the 'X' in the upper right hand corner of the screen. Make sure you hit the 'X' for the window, and not the one that closes Inventor.

Now you'll be returned to your Inventor modeling screen. The note will appear in the browser, and can be accessed by double clicking on the note.


By default, Inventor will have the notes show up on the screen as little yellow notes. You can turn this off by going to Tools>Application Options, and choosing the Notebook Tab. If the option are checked. The little yellow note icon will appear on screen. However, if you uncheck them, you won't see them.

I usually prefer to keep them unchecked myself. Because if you get a lot of them, your screen starts getting pretty cluttered.


That's it. Farewell to 2008, and I hope everyone has a fantastic 2009!





The KETIV Team

Suppress Your Frustrations (and drawing views!)

It's been a typical December, that is, hectic. I'm almost caught up from the trip to Vegas now (although I'd wish I'd been there to see it snow!).

Finally a chance to blog another tip again.

Have you ever had to generate a view (like the section view below) on a drawing? What if there's a case where the only view required was the section view?

The interesting part about this situation was the base view was required in order to generate the detail, so you had to have it whether you required it or not.



If you've been around Inventor for a while, you probably remember the old trick. Drag the view off the border. Of course that still left that view there, which was a little insufficient (and maybe just a little irritating!)



However, now, if you right click on a view, you can choose 'Suppress' and the view will suppress and disappear without having to be moved off the page.


Now the view goes away, and you don't have the baggage off the edge of the screen!



And by the way, if you need to unsuppress the view, right click on the view in the browser, uncheck 'Suppress', and you can return the view!



It's a little cleaner, and a little more efficient.

Happy Inventing! And Happy Holidays!

I'm back from AU!

Autodesk University is done for 2008 now. I have to say that I always learn something new, and I'm always glad I went (even though it can get pretty exhausting).

I ran into a lot of old friends and colleagues, as well as making a few more, and saw a couple of tricks too.

I'm afraid I still have to sort out some notes and get all my tricks put together. But I'm hoping to start posting some by the end of the week (really!).

One of the things I did start to get to play with is a product called Showcase. Picture being able to bring in an Inventor model, and render it in real time. Picture photo-realistic renderings that you can rotate, view, and update almost instantly (not the render in place, change rerender type).

I attached a screen capture for interest, and I'll kick up some tips at the end of the week!

There's a webcast on Showcase coming up that Kyle (our industrial design AE) is hosting. Feel free to check them out at the links below!

Showcase Your Inventor Designs – Dec. 18

Message: Accelerate your design review process with high end, easy-to-use rendering.

Showcase Your SolidWorks Designs – Dec. 18

Message: Showcase works with Solidworks.

Plus a couple of pictures from AU (sorry for the bad quality, I had to use my cell phone).


Rotating models by touching the screen directly. It's like a giant I-phone!


Sitting in one of the classes. I think this is JD Mather's importing neutral formats course!

Off to Autodesk University!

I hope everyone had a great Thanksgiving Holiday. I had a great holiday, but as usual, they always seem a little too short.

This week, it's off to Autodesk University in Las Vegas for more courses, and a chance to see other users and exchange ideas.

I'm hoping to blog from the event, and hopefully share a trick or two that I might learn.

I'll see everyone when I get back!